Starter motor questions - rebuild
08-31-2013, 12:34 AM
Post: #2
 
When the solenoid moves the gear out, it also makes a contact to switch
power to the motor. So, if solenoid moves but the motor does not turn,
there are two possibilities...

1. The solenoid contacts are not making a connection, or

2. The carbon brushes on the motor are worn down and no longer
making a good contact with the copper commutator. This one can often
be temporarily fixed by giving the body of the starter a sharp crack with
a small hammer or similar tool.

This shakes the brushes enough to get then to move fractionally, and
make a better contact. Still needs fixing by replacing the brushes :wink:

[Image: AEU86 AE86 -  ]

B and M are the contacts that make to put power on the motor.
S is the small wire that supplies power to the solenoid.

Cheers... jondee86
Find all posts by this user


Messages In This Thread
[] - jondee86 - 08-31-2013 12:34 AM
[] - Jezza_hr - 08-31-2013, 01:04 AM
[] - allencr - 08-31-2013, 07:12 AM
[] - Jezza_hr - 08-31-2013, 08:43 AM
[] - Apsogos - 08-31-2013, 03:05 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Silvertop - New Haltech ECU & Couple of questions 20valver 10 2,266 05-26-2024 07:40 PM
Last Post: totta Crolla
  Windscreen stoopid(?) questions.... Mylesmck 7 1,062 04-30-2024 09:46 PM
Last Post: Mylesmck
  Bluetop Engine Rebuild multiple question Goal 150-160hp Hanzo 16 9,214 04-19-2021 10:08 PM
Last Post: Hanzo
  Rear Differential rebuild chenfon 10 9,193 11-20-2020 12:18 AM
Last Post: totta Crolla
  AE86 4A-GE 16v engine harness rebuild FanIsHere 7 10,005 01-17-2020 08:04 PM
Last Post: Project D

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication