|
Anyone running DIY Coilovers?
|
|
11-19-2013, 12:52 AM
Post: #2
|
|||
|
|||
|
I'm running AE86 suspension on my KE20 with 2T-G (910kg curb weight).
- Tokico HTS short stroke inserts on shortened housings. - RallyDesign springs 325 Rate (google tells me, this should be 4,4 kg/mm), 10,5" Free Length, they are quite long, as i have the threaded bit sitting a bit low on the housing, because i was afraid of damaging the threads for the gland nut. ![[Image: AEU86 AE86 - ]](http://www.ke20.nl/Corolla/restauratie/sillylow01.jpg "AEU86 AE86 -") If you can get the threaded bit a bit more upwards then i did, i'd say 8" springs would be good enough, otherwise a set of springs from RallyDesign (2,25" inner diameter) is 30 pound. I'm running without helper springs. "It's all about the heart, the people who focus on parts, turbo's and all that stuff...they're just losers." -Shinji Minowa |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Anyone running DIY Coilovers? - Rasteirinho - 11-19-2013, 12:20 AM
[] - The Doctor - 11-19-2013 12:52 AM
[] - Rasteirinho - 11-19-2013, 11:16 AM
[] - Rasteirinho - 11-19-2013, 05:40 PM
[] - The Doctor - 11-19-2013, 06:17 PM
[] - totta Crolla - 11-19-2013, 10:30 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| No idle below 2000 rpm rich running | Steller Engineering | 3 | 1,436 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
| Running issues | sam3007 | 6 | 2,777 |
06-26-2022 01:34 PM Last Post: Dave W |
|
| 4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 7,258 |
11-09-2020 10:51 AM Last Post: totta Crolla |
|
| Carina drivers! - Coilovers for a TA60/62 | nyberrg | 2 | 6,213 |
06-05-2017 10:03 AM Last Post: nyberrg |
|
| Fitting driftworks CS2 coilovers | bozu | 2 | 4,638 |
05-30-2017 10:50 AM Last Post: bozu |
|
User(s) browsing this thread: 8 Guest(s)