OST-029: California here I come.....

[oldeskewltoy]

from another forum Wrote:Since this head is coming here to Cali. Is the customer going to do any kind of camshaft or just use the stockers? I'd be curious I know that my web cams in my N/A engine wouldn't pass smog.

Really? which Webs? My AE86 used the Web 294 grind and they passed, albeit with a new OEM type cat, but they passed. And I'm pretty sure OST-019 passed using a mild cam, but it needed a bit of ignition timing tweaks to pass.

Most likely my client will be running a set of the "big", or early stock cams if he can get himself a good pair. There is a Cat cam that MIGHT work, its their shortest, lowest lift cam, it measures 214 @ .040" lift, with a gross lift of 8 mm. The Web 294 cam is 214 also, but @ .050" lift.

oldeskewltoy Wrote:"Volumes" to come........

Checking chamber volumes on the cut head.... it is down to 35.1cc (tolerance = + or - .1cc)




So we can move on... besides waiting a week for the machine work, that same time was used to get new springs....



16 new OEM springs...


Now its just left too assembly.....



More to come.....