Anyone farmiliar with hks camshaft types for 4age?
11-17-2017, 05:30 PM
Post: #4
RE: Anyone farmiliar with hks camshaft types for 4age?
(11-17-2017 02:48 PM)Dave W Wrote:  I have a big port with the same HKS cams. But I believe that the stated lift is actually 8.3mm on both cams. The 8.1 is the valve max opening after the lash clearance is taken into considation. I'm not running with TVIS system on engine and I have a very good exhaust system. With that in mind, the intake cam is set 3 1/2 degrees advance and the exhaust camshaft is 1 degree advance which helped improve the lower end rpm torque.
I would not be concerned about the difference in lift. You are not going to see any real difference between 1 or 2 tenths of a mm in cam lift.
Do not try to degree in the cams at max lift. Set up the cams by reading a equal lift on both sides of opening and close ramps.
Dave W

I have checked the cam timing off of max lift for both and im getting 114degrees for my 264 inlet and 112for 256 exhaust cam, this is without touching any of the cam timing, they were set up like this but had previously been removed from the engine, the engine is now running silver top rods with wiseco pistons 1mm oversived and silver top throttle bodies with 4-2-1 exhaust. What bottom end are have you in your car? im not sure if the piston and can combination i have will be any good to be honest
Find all posts by this user


Messages In This Thread
RE: Anyone farmiliar with hks camshaft types for 4age? - spill86 - 11-17-2017 05:30 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  HKS valve springs totta Crolla 3 2,173 05-25-2022 10:24 PM
Last Post: oldeskewltoy
  rear bilstein B6 shocks 2 types what to choose? Ryo 5 3,238 07-25-2021 04:41 AM
Last Post: Bean
  Question about camshaft CHACAMAN 2 3,599 07-07-2020 06:41 PM
Last Post: oldeskewltoy
  HKS Legal exhaust Nakilad 2 4,670 07-31-2019 10:00 AM
Last Post: Nakilad
  Camshaft ID kazi 6 7,502 09-26-2018 12:07 AM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication