Brake Bias Questions
11-22-2018, 07:10 PM
Post: #4
RE: Brake Bias Questions
Thanks guys Smile that really helps!

Sounds like same pads and work back is the most reasonable way around this.

With regards to the Bias/Proportioning question, what IS the difference? I always thought they were interchangeable terms.
Does proportioning just work by limiting the output pressure (compared to input pressure) of the rear brake circuit in comparison to the front?
While Bias is adjusting the pedal input pressure over a %output split across 2 individual cylinders?
Find all posts by this user


Messages In This Thread
Brake Bias Questions - mad.matt - 11-21-2018, 06:42 PM
RE: Brake Bias Questions - Project D - 11-21-2018, 11:19 PM
RE: Brake Bias Questions - totta Crolla - 11-22-2018, 10:06 AM
RE: Brake Bias Questions - mad.matt - 11-22-2018 07:10 PM
RE: Brake Bias Questions - totta Crolla - 11-22-2018, 07:46 PM
RE: Brake Bias Questions - mad.matt - 11-23-2018, 01:25 PM
RE: Brake Bias Questions - pack - 12-06-2018, 01:22 PM
RE: Brake Bias Questions - totta Crolla - 12-07-2018, 11:09 AM
RE: Brake Bias Questions - Dave W - 12-08-2018, 02:50 PM
RE: Brake Bias Questions - Rascal21 - 01-02-2019, 04:17 PM
RE: Brake Bias Questions - mad.matt - 01-03-2019, 04:54 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Silvertop - New Haltech ECU & Couple of questions 20valver 10 2,466 05-26-2024 07:40 PM
Last Post: totta Crolla
  Windscreen stoopid(?) questions.... Mylesmck 7 1,244 04-30-2024 09:46 PM
Last Post: Mylesmck
  wider rear axle,track width,suspension questions ditn 6 8,839 10-18-2016 11:50 AM
Last Post: fantapants
  Suspension questions leon205gti 17 14,944 04-30-2016 09:26 PM
Last Post: krullibull
  Brake questions d3nso 12 14,873 01-20-2016 01:06 PM
Last Post: pack

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication