|
OST-053: Massaging a 20V Blacktop
|
|
09-05-2019, 02:58 AM
Post: #29
|
|||
|
|||
RE: OST-053: Massaging a 20V Blacktop
(08-06-2019 01:46 AM)oldeskewltoy Wrote: shim skirt depth was between .245mm and .265mm (just about .010") on 5 samples     I was being careful with the new tool.... and didn't realize my mistake until today. At only .010" deep the shim could become dislodged, especially on the exhaust side.... but what I was reading as .010", was actually .090". I was just looking at the big needle, and didn't look at the small one... DOH  So with .090" depth, if you have the shims set correctly, you can't toss a 20V shim Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| (Catching up) OST-086 MM: Built for Mario | oldeskewltoy | 2 | 2,413 |
10-28-2022 08:23 AM Last Post: decryphe |
|
| OST-093: My, My, Mystery | oldeskewltoy | 10 | 4,516 |
09-18-2022 02:19 AM Last Post: oldeskewltoy |
|
| (Catching up...) OST-085: 7AG Big Valve build w/Cat Cams 262 9.0mm lift cams | oldeskewltoy | 5 | 3,140 |
09-09-2022 09:07 PM Last Post: Vaptor |
|
| (Catching up...) OST-083: Salvage operation | oldeskewltoy | 2 | 2,026 |
07-11-2022 08:32 PM Last Post: banpei |
|
| (Catching up...) OST-082: Nope, never again... at least not without all the parts | oldeskewltoy | 0 | 1,608 |
06-28-2022 09:17 PM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 4 Guest(s)