Cheers from Germany

[ps13michi]

Hi and thank you maby I can manage to post some pictures or the links.
Yes its the kouki version and unfortuneately with kat and AFM. This year I went for toda cams etc but it did not work out as expected so i decided to change the exhaust and convert to afm.
My first intention was to go for a arduino wich read the signal of the afm and than go for a hot wire. The arduion sould translate the signal from hot wire 0-5v to the 0-9 or 12v from the afm...

But than I got some parts for the map conversion and that was the way for me. Due to the good shape of the loom I decided to make the swap without changing the inner loom only the EFI / Engine loom. Maby I can post that or make a short video bc I did not find many informations of the conversion.

thanks for the welcome and I will post the current spec list of my oem + car

Engine
- Toda cams 272 in 264 out
- Toda cam gears
- Toda belt
- Clear cam cover
- ARC airbox
- Conversion to Map
- Tomei Fuel pressure regulator
- Tomei Fuel pressure gauge
- T3 Cooling panel
- Fan Shroud
- Oil Temp & Pressure Defi
- Watertemp aftermarket
- Wideband AEM
- TRD wires
- Wrinkle Cam covers
- Heat shield
- Martelius Header
- TRD oil & water cap
Interior
- Wiechers cage
- No Bitumen
- Bride Seat console
- Recaro Spg and Ideal seat (both confetti fabric)
- Nardi Classic steering wheel
- Steel Shift Knob
- Steel Drift Button
- Defis in Radio
- Water Temp
- Red Seat belts
- Apexi SAFC 2 black edition
Exterior
- GFK oem copy fenders
- Painted white line
- Lip in the front
- Small black stripe
- Hemi exhaust
- Levin badge
- VFL grill
- Fog lights in grill
- Glas roofwindow (instead of electric steel)
- Wind deflectors
- Tow hook in the front
Handling
- Cobra Springs
- Bielstein dampers
- Silver camber plates (BMW M caps)
- Dome brace
- Evolved Roll center Adjusters T3
- Group D 4 Links one side PU
- Group D Panhard one side PU
- Sway bars AE86 world
- PU bushings black
- Nankang NS2R 185
- Rays Volk Racing Artisan Spirit FIN 14x7 offset 0 14x7,5 offset -10