How fast is a 86 with 20V?
10-28-2004, 11:07 AM
Post: #23
 
@Kristian, thats a nice improvement you have there. Biggest gain has to be the lightening and the headers. Still the quarter mile times aren't as low as I would have guessed. I have some friends with mildly modified crx vtec's (there it is again, since everyone seems to love it so much) running into high 14 sec 1/4 miles. Maybe only a exhaust and intake (which I consider a sound modification, not performance...(unless the old ones were clogged), some headers and a little richer in fuel. I know from these guys that they aren't making monster power. The best one had 170bhp at the crank and probably got lucky on a healthy engine from the factory (some make a little more power, some less. differance kan be 5 crank hp).

I had a std DOHC crx and later the same engine in a civic. They have a little more power up top, can rev 400rpm less and have more of a rush towards redline. The 4A-GE has a much nicer torquespread (versitile!) and as a consequence feels a little more anemic. Both are great engines.

If you want to sample a piece of shit, then come and take a ride in my MX5. Basically its a turbo engine without a turbo and it shows. Awfull performance and I'm lucky to get 95km's from a liter of petrol. I absolutely hate it...

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user


Messages In This Thread
How fast is a 86 with 20V? - Jan Pedersen - 10-26-2004, 01:20 PM
[] - NoHachi - 10-26-2004, 01:27 PM
[] - Jan Pedersen - 10-26-2004, 01:53 PM
[] - KristianAE86 - 10-26-2004, 02:00 PM
[] - Jan Pedersen - 10-26-2004, 02:04 PM
[] - DJexor - 10-26-2004, 02:09 PM
[] - NoHachi - 10-26-2004, 02:25 PM
[] - robokill - 10-26-2004, 04:31 PM
[] - Jan Pedersen - 10-26-2004, 05:43 PM
[] - NoHachi - 10-27-2004, 09:12 AM
[] - robokill - 10-27-2004, 04:29 PM
[] - NoHachi - 10-27-2004, 06:08 PM
[] - Jan Pedersen - 10-27-2004, 06:23 PM
[] - Mux213 - 10-27-2004, 06:26 PM
[] - NoHachi - 10-27-2004, 06:30 PM
[] - Mux213 - 10-27-2004, 06:54 PM
[] - Ian.G - 10-28-2004, 12:57 AM
0-100 / 201m / 402 m - KristianAE86 - 10-28-2004, 01:50 AM
[] - robokill - 10-28-2004, 08:12 AM
[] - Ivan141 - 10-28-2004, 10:33 AM
[] - Mux213 - 10-28-2004, 10:41 AM
[] - Ivan141 - 10-28-2004, 10:47 AM
[] - NoHachi - 10-28-2004 11:07 AM
[] - Mux213 - 10-28-2004, 12:01 PM
[] - Ivan141 - 10-28-2004, 12:13 PM
[] - Mux213 - 10-28-2004, 12:21 PM
[] - NoHachi - 10-28-2004, 01:48 PM
[] - Richie - 10-28-2004, 07:50 PM
[] - Ian.G - 10-28-2004, 08:50 PM
[] - 20vWill - 11-01-2004, 03:35 PM
[] - NoHachi - 11-01-2004, 04:03 PM
[] - Mux213 - 11-01-2004, 04:20 PM
[] - 20vWill - 11-01-2004, 04:27 PM
[] - NoHachi - 11-01-2004, 04:33 PM
[] - Mux213 - 11-01-2004, 04:54 PM
[] - NoHachi - 11-01-2004, 05:18 PM
[] - Mux213 - 11-01-2004, 05:28 PM
[] - banpei - 11-01-2004, 05:28 PM
[] - Ivan141 - 11-01-2004, 05:53 PM
[] - KristianAE86 - 11-11-2004, 11:16 PM
[] - KristianAE86 - 11-11-2004, 11:20 PM
[] - Richie - 11-13-2004, 12:34 AM
[] - Jan Pedersen - 11-14-2004, 12:33 AM
[] - Plex - 11-14-2004, 09:43 AM
[] - mo-racing - 11-14-2004, 11:37 PM
[] - KristianAE86 - 11-15-2004, 01:19 AM
[] - mo-racing - 11-18-2004, 12:44 AM
[] - Jan Pedersen - 01-10-2005, 12:47 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Machining Pistons to run 20v head... And FCR's on a 20v? PazzaAE86 2 5,062 09-15-2013 01:08 AM
Last Post: jondee86
  20v bt swap to ae86 (20v or 16v flywheel????) kid 11 14,680 12-08-2007 04:09 PM
Last Post: Jan Pedersen
  OFSET on stock rims - FAST REPLY ! KristianAE86 15 13,285 05-18-2005 05:59 AM
Last Post: Widar

Forum Jump:


User(s) browsing this thread: 12 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication