New camshafts for 4age -> 160hp

[jamiemirror]

BenR Wrote:twin 40's are pretty small nowadays and you wont be making much more than 140-150bhp on them with the chokes at their largest size, then you will get low velocity problems as the signal strength is low.

I don't know the specs of the camshafts, but if you are able to decently remap or use a good piggy back system (NOT an SAFC etc) then it could be a nice drive. All our super production based 86's ran on the std type inlet manifold with about 160-170bhp back in the late 80's.

http://home.att.net/~jroal/carb.exe
This is a simple tool for such calculations. Also can compare single TB and 4 TB setup CFMs.

http://www.club4ag.com/faq%20and%20tech_...04A-GE.htm
This is also usefull article about 4AGE and carburators. Seems that 40s will be good choice for 3000-8000RPM range in 1.6 engine like 4AGE.