Clutch Master Cylinder..how to remove?

[mrgud]

I did this work recently, got some footage of it...

What you have to do is unscrew the master brake cilinder booster from inside the car, 4 screws, not so easy to come to... Then you move aside the booster and unscrew the 12 size nut...



BUT I would check the slave cilinder first because it is easyer to remove and repair... than if everything is not in order, go with the master...

slave


here it is



i repaired my whole hidraulic sistem on my car a month ago...
all brake calipers, master brake cylinder, master and slave clutch... everything... It costed somewhere around 100€ (i did it bymyself with original Toyota rubbers )
Probably your master cilinder has weak rubers and the oil is going in the opposite direction... Your pedal is probably wet with oil in the inside of the car... or you have oil leekadge underneeth the cilinder...