Gearbox change or rebuild?
12-09-2006, 04:40 PM
Post: #13
 
As André said: pay attention to the manual and have a press nearby

I would complete advising you to have some atention with the press, otherway you may have additional labour.

The better way to confirm if you're doing right it's every time you come from the press after fitting a bearing, check if you can rotate the input and output shaft by hand.

If you can't something it's wrong (maybe to much force used with the press).

You have always to be able to rotate the shafts by hand.
Find all posts by this user


Messages In This Thread
Gearbox change or rebuild? - Jezza_hr - 12-05-2006, 08:11 PM
[] - Ivan141 - 12-05-2006, 08:57 PM
[] - Jezza_hr - 12-05-2006, 09:18 PM
[] - adomz - 12-07-2006, 06:55 PM
[] - Dorito86 - 12-07-2006, 07:22 PM
[] - adomz - 12-07-2006, 07:44 PM
[] - Red - 12-07-2006, 07:46 PM
[] - Dorito86 - 12-08-2006, 01:53 AM
[] - Red - 12-08-2006, 02:15 AM
[] - jamiemirror - 12-08-2006, 10:29 AM
[] - Holli - 12-09-2006, 01:28 PM
[] - apardal - 12-09-2006, 02:15 PM
[] - Rasteirinho - 12-09-2006 04:40 PM
[] - Jezza_hr - 12-13-2006, 01:36 PM
[] - Eircamae86 - 12-13-2006, 04:59 PM
[] - Jezza_hr - 12-16-2006, 10:37 PM
[] - rallyman1978 - 12-17-2006, 08:04 PM
[] - Jezza_hr - 12-17-2006, 08:19 PM
[] - rallyman1978 - 12-18-2006, 09:50 PM
[] - Ivan141 - 12-18-2006, 11:14 PM
[] - Kas - 12-19-2006, 11:54 PM
[] - jamiemirror - 12-20-2006, 12:06 PM
[] - firehawk - 12-20-2006, 07:48 PM
[] - Kas - 12-24-2006, 03:12 PM
[] - matt mead - 01-02-2007, 05:39 AM
[] - Jezza_hr - 01-02-2007, 09:08 PM
[] - matt mead - 01-02-2007, 10:54 PM
[] - Jezza_hr - 01-03-2007, 03:28 AM
[] - matt mead - 01-03-2007, 04:25 AM
[] - Red - 01-03-2007, 04:35 AM
[] - Jezza_hr - 01-03-2007, 02:28 PM
[] - NoHachi - 01-03-2007, 03:38 PM
[] - matt mead - 01-03-2007, 11:30 PM
[] - EE80Liftback - 01-03-2007, 11:49 PM
[] - Red - 01-04-2007, 12:03 AM
[] - EE80Liftback - 01-04-2007, 12:04 AM
[] - NoHachi - 01-04-2007, 06:33 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Bluetop Engine Rebuild multiple question Goal 150-160hp Hanzo 16 9,123 04-19-2021 10:08 PM
Last Post: Hanzo
  Rear Differential rebuild chenfon 10 9,097 11-20-2020 12:18 AM
Last Post: totta Crolla
  AE86 4A-GE 16v engine harness rebuild FanIsHere 7 9,938 01-17-2020 08:04 PM
Last Post: Project D
  Rear Caliper Rebuild mad.matt 16 16,727 01-19-2017 02:19 PM
Last Post: Project D
  Rebuild rear disc brakes toyota crown ms112 axle bozu 0 3,765 12-21-2016 09:37 PM
Last Post: bozu

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication