Can't fire up. Buzzing from the relay, lamps blinkin- HELP

[Red]

Ivan?
"It will also throw codes if the engine hasnt run for a while, dont worry about that."
He said he's had the battery disconnected for a long time. Once you remove power from the ECU for a couple of minutes, the codes stored in memory all go away. In fact, that's how you clear the codes form the computer, you pull a fuse for a couple of minutes.
I don't remember the exact time needed..I think less than two minutes if you pull the right fuse, or the battery.

"The fuelpump is easy to check..it will start running when you turn the starter engine on. " That's only true IF the fuel pump relay and other things are working properly. And then you need one person to go around back and listen while the other one turns the key.<G> Much simpler to use the check connection and make it a 1-man job. Also much less chance of overheating the starter, which should not be run more than 15 seconds every 15 minutes or so. More than that and they overheat.