Which head do I have - On the car, not me!
02-07-2007, 01:17 AM
Post: #7
 
If you are sure it´s an TVIS, then there is no doubt.....you´ll need the bigport gasket.
Look between the manifold and head, is there a plate about 2cm thick? If so, it´s most likely a TVIS engine/bigport.
Also look at the inlet manifold, if it´s "clean" on top without "ribbles" then it´s a TVIS/bigport manifold.
All of this of course, is with respect to the fact that an adapter plate from bigport-manifold to small port head can be installed previously, allthough very unlikely.
Make sense?

My evil Red/Black Panda
http://www.bilgalleri.dk/html/gal_visbil.asp?ID=12832
My current JDM AE86 project
http://www.bilgalleri.dk/html/gal_visbil.asp?ID=31609
Find all posts by this user


Messages In This Thread
[] - jamiemirror - 02-06-2007, 11:52 PM
[] - byd1380 - 02-07-2007, 12:01 AM
[] - jamiemirror - 02-07-2007, 12:25 AM
[] - SekiguchiUeno - 02-07-2007, 12:57 AM
[] - byd1380 - 02-07-2007, 12:59 AM
[] - peter møller - 02-07-2007 01:17 AM
[] - peter møller - 02-07-2007, 01:19 AM
[] - SekiguchiUeno - 02-07-2007, 01:39 AM
[] - byd1380 - 02-07-2007, 02:00 AM
[] - firehawk - 02-07-2007, 09:12 AM
[] - jamiemirror - 02-07-2007, 12:05 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  20v BT - which oil pump? Mylesmck 4 2,621 06-21-2022 04:51 PM
Last Post: pack
  Rim width. Which is best.... Dino86 5 6,706 01-07-2017 03:09 PM
Last Post: Dino86
  which connector is this ditn 7 7,555 07-27-2015 11:24 AM
Last Post: pack
  How would/have you rebuild your 4age? joaotcgt 6 8,893 07-21-2015 10:40 AM
Last Post: mad.matt
  Haslbeck front spoiler, which foglights? wouter86 2 4,989 02-15-2015 11:14 AM
Last Post: ditn

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication