HELP Exhaust issue's

[oldeskewltoy]

As you can see... fit is BETTER than OEM.....

also need a short edit... the system shown is no longer available... and thats GOOD! Let me explain... this /\ system was one of 3 Fujitsubo had for the AE86. This was the short muffler model. This model is no longer available. The current kit uses a longer muffler (Perfectly skewed) so it runs evenly along the fuel tank heat shield, and the twin tips fit out perfectly flush. The front part of the piping is identical. Finally I mentioned 3 Fujitsubos, and all I described were 2... well the third one is idential to the long muffler twin tip, but it has a single tip....


http://www.fujitsubo.co.jp/search/prod-v...D=00000194

Here is the no longer available system....

http://www.fujitsubo.co.jp/search/prod-v...D=00000194

Here are photos of all three if you look carefully you can see the differences I've outlined




All the fujitsubo systems use 2" mandrel bent piping, all piping is heavily aluminized, and the muffling sections are stainless. For those running in excess of 140hp, there is a mandrel bent 60mm exhaust kit from Brave in Japan. Cost is about $450



http://www5f.biglobe.ne.jp/~brave-nh/pro...etail.html

BTW... both are available through cyberauto(already on the vendor list) you can email cyberauto at [email protected], or at [email protected]