Some aftermarket parts FS

[ke86]

1. NEW VIOLENCE OIL CATCH TANK *MADE IN JAPAN*



SELLING FOR ONLY : EU 55 !

Product Information:
Oil Catch Tank catches the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. It keeps the engine clean even under hard driving conditions. VIOLENCE Oil Catch Tank is also an excellent engine dress up item, enhancing the look of a highly performance racing car.
Latest Oil Catch Tank design, compact and powerful.
Cast, machined, and polished aluminium tank
Clear braided hose with EARL"S Econ-o-fit hose clamps.
Sight tube for monitoring the oil level.
Improves car performance and well maintenance to engine.
Mounts vertically or horizontally
Universal Fitting, Suitable to All types of Car
Comes complete with hose
Easy installation with manual included


2. CUSCO Oil Catch Tank 9mm Fitting *Made in Japan*



SELLING FOR ONLY : EU75!

PRODUCT DESCRIPTION: -
One new GENUINE Cusco Oil Catch Tank with 9mm hose for most:
Naturally Aspirated (N/A) cars.
Turbo cars.
The dimension of the catch tank is approximately 15cm (height) x 8cm (diameter) in size.
Cusco oil catch tank is used to reduced the oil vapours from going into the air intake charge. The oil vapours contaminate the air intake charge by mixing with the air and fuel that are used to create combustion in the engine.
As a result of this contamination, it reduce burn efficiency, increase detonation risk, and power factor in both naturally aspirated and turbo cars.
Beside reducing the oil vapours going into the intake charge. The oil catch tank enable a turbo cars to increase approximately additional 3psi of boost without the risk of detonation.
It is easy to install, however bracket may need to be modified to suit the application.


3. D1-Spec Breather Tank *Made in Japan*


SELLING FOR ONLY : EU 60!

PRODUCT DEscriptION: -
Genuinely Made in Japan
Dimension: Length: 140mm X Diameter: 70mm
13mm Outlet & 13 mm Inlet
Reservoir Tank that is made from 6061 T6 lightweight aircraft grade billet aluminum
Beautifully Tig welded aluminium pressure tank
Comes complete with brackets and all necessary fitting kits
Removes air from your engine and radiator, prevents air locks and leaves room for expansion
High Quality and Long Lasting


4. New F1-Z Racing Sport Oil Catch Tank (Made in Japan)



SELLING FOR ONLY : EU60 !

Product Information: -

F1-Z Oil Catch Tank catches the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. It keeps the engine clean even under hard driving conditions. F1-Z Oil Catch Tank is also an excellent engine dress up item, enhancing the look of a highly performance racing car.

Latest Oil Catch Tank design, and compact
Cast, machined, and polished aluminium tank.
Clear braided hose with EARL"S Econ-o-fit hose clamps.
Sight tube for monitoring the oil level.
Improves car performance and well maintenance to engine.
Mounts vertically or horizontally.
Universal Fitting, Suitable to All types of Car.
Comes compete with hose and mounting brackets.
Easy installation with manual included.


Shipping cost estimate is about EU 65 for each of these catch tanks but can vary depending on country. Shipping will be via Fedex Air Mail.

Payments can be made by TT into my bank account. I understand there is a certain handling fee when doing a TT via banks so I suggest that you order more items at one shipment so we can both save on shipping cost and TT fees.

Pls contact me either by PM or email shall you require more details.