|
AE86 16v standalone - any suggestions?
|
|
05-14-2007, 10:27 AM
Post: #3
|
|||
|
|||
|
Anything will work for 200hp.
If you want 200hp AND you want to have excellent driveability through the revrange -> Motec,etc etc. Including a day or two to do the first rough tuning on a bench. A 200hp 1.6 4A-GE will have a very peaky VE-characteristic, with lots of small peaks. To get the ignition map anywhere near optimal you'll need lots of datapoints. Fuel is of slightly less importance, as long as it doesn't lean out to much under accel. A wheel to steer the front of the car A pedal to steer the rear |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
AE86 16v standalone - any suggestions? - woper - 05-14-2007, 12:05 AM
[] - NoHachi - 05-14-2007 10:27 AM
Standalone ECU - byd1380 - 05-14-2007, 05:36 PM
[] - oldeskewltoy - 05-14-2007, 07:49 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Squeaky seats - any tips? | decryphe | 2 | 983 |
10-18-2023 10:13 PM Last Post: Power_uP |
|
| D2 Coilovers any good? | heshan | 18 | 25,889 |
04-04-2017 02:40 AM Last Post: hachirokkos |
|
| ITB convert need standalone ECU | izanagi | 2 | 6,599 |
04-07-2016 11:24 PM Last Post: izanagi |
|
| Is this oil pump any good? | megabob | 3 | 5,086 |
02-08-2014 12:46 AM Last Post: megabob |
|
| 20V VVT on standalone ECU | fax0815 | 5 | 10,011 |
08-09-2013 09:27 AM Last Post: rene |
|
User(s) browsing this thread: 2 Guest(s)