Valve sound

Threaded Mode | Linear Mode

Valve sound

05-14-2007, 11:17 AM

Post: #50

jondee86 Offline

Posting Freak

Posts: 947
Joined: Apr 2007
Reputation: 1

Cam choices....

The lowest cost option would probably be to see if you can find some
good condition OEM cams from a junkyard engine.

Better option would be to get your own cams builtup and then reground
to stock or similar profile. Any reputable engine rebuilder should be able
to arrange this. Just make sure the base circle diameter is not reduced
from stock.

Best option would be the Toda cams if they are in good condition, and
available at a reasonable cost Smile

At 264 deg they should still work with
the stock ECU and give you a nice improvement in top end performance.

If you don't want to pull the head, just do a compression test to make
sure everything is sealing properly. 40,000 km is not a big distance for
a 4AGE, and it should be fine.

Cheers... jondee86

The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.

« Next Oldest | Next Newest »

Messages In This Thread

Valve sound - dikolotour - 03-21-2007, 09:49 PM

[] - domi - 03-22-2007, 07:09 AM

[] - NoHachi - 03-22-2007, 10:17 AM

[] - dikolotour - 03-22-2007, 10:31 AM

[] - jamiemirror - 03-22-2007, 10:47 AM

[] - dikolotour - 03-22-2007, 10:55 AM

[] - domi - 03-22-2007, 12:37 PM

[] - Akis308 - 03-22-2007, 01:03 PM

[] - gon - 03-22-2007, 01:46 PM

[] - dikolotour - 03-22-2007, 01:51 PM

[] - apardal - 03-22-2007, 02:30 PM

[] - NoHachi - 03-22-2007, 02:35 PM

[] - dikolotour - 03-22-2007, 02:39 PM

[] - jamiemirror - 03-22-2007, 02:42 PM

[] - NoHachi - 03-22-2007, 04:47 PM

[] - E-volve - 03-22-2007, 05:18 PM

[] - Akis308 - 03-22-2007, 05:20 PM

[] - Akis308 - 03-22-2007, 05:24 PM

[] - jamiemirror - 03-22-2007, 09:33 PM

[] - dikolotour - 03-22-2007, 10:02 PM

[] - Dorito86 - 03-22-2007, 10:14 PM

[] - domi - 03-23-2007, 07:03 AM

[] - E-volve - 03-23-2007, 12:51 PM

[] - NoHachi - 03-23-2007, 01:32 PM

[] - jamiemirror - 03-23-2007, 02:15 PM

[] - NoHachi - 03-23-2007, 03:15 PM

[] - jamiemirror - 03-23-2007, 03:20 PM

[] - E-volve - 03-23-2007, 04:28 PM

[] - dikolotour - 03-23-2007, 09:42 PM

[] - dikolotour - 04-02-2007, 07:25 PM

[] - robokill - 04-02-2007, 07:54 PM

[] - dikolotour - 04-02-2007, 08:06 PM

[] - AshCampbell - 04-02-2007, 08:32 PM

[] - dikolotour - 04-02-2007, 09:01 PM

[] - totta Crolla - 04-03-2007, 09:13 PM

[] - TE71corolla - 04-03-2007, 10:54 PM

Tic... tic... or noc... noc.... ?? - jondee86 - 04-06-2007, 10:35 AM

[] - dikolotour - 04-13-2007, 10:04 AM

[] - robokill - 04-13-2007, 10:15 AM

[] - dikolotour - 04-13-2007, 12:33 PM

[] - dikolotour - 04-24-2007, 08:27 PM

[] - jamiemirror - 04-24-2007, 08:35 PM

[] - dikolotour - 04-24-2007, 08:48 PM

[] - jamiemirror - 04-24-2007, 08:53 PM

[] - dikolotour - 04-24-2007, 08:56 PM

[] - jamiemirror - 04-24-2007, 09:06 PM

[] - dikolotour - 04-24-2007, 09:09 PM

Wear on camshaft lobes.... - jondee86 - 04-24-2007, 10:47 PM

[] - dikolotour - 04-26-2007, 06:55 PM

Cam choices.... - jondee86 - 05-14-2007 11:17 AM

[] - dikolotour - 05-14-2007, 11:40 AM

[] - Akis308 - 05-14-2007, 12:21 PM

[] - dikolotour - 05-14-2007, 12:33 PM

[] - alimonos - 05-14-2007, 01:58 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	4AGE Valve Buckets Scored	Steller Engineering	2	880	10-06-2023 05:34 PM Last Post: Steller Engineering
	20 Valve Blacktop smoking after engine flush - why?	RolanTHUNDER	2	1,348	11-30-2022 12:09 PM Last Post: RolanTHUNDER
	HKS valve springs	totta Crolla	3	2,160	05-25-2022 10:24 PM Last Post: oldeskewltoy
	Valve clearance	leon205gti	7	8,573	11-25-2016 03:24 AM Last Post: oldeskewltoy
	16v oversize valve seats	harkes	9	12,409	09-20-2016 05:04 PM Last Post: oldeskewltoy

User(s) browsing this thread: 12 Guest(s)