4AGE ITB's Rolling Road session

[jos 4 age]

Nice car Ivan ! ( please post a pic :wink: of your setup) I assume the dyno read out you posted is crank horsepower ?
129 Hp is not a bad figure. Driveability must be good if I look at the graph ? weight of the car ?
I drive a fisher fury with small port 4 age and stand alone ecu, throttle bodies form a suzuki gsxr ( 48mm I believe ) and custom made exhaust manifold giving 139 hp at the flyweel. I use 280cc injectors ( do not know which type as they came with the car ) and a sard FPR ( which is not fully functionable since I have to connect the vacuum union to the airbox later ).

I am still working on an airbox as I am using a pipercross box filter which sucks hot air . After the airbox is finished and I have some velocity stacks I will have the car dynood and the ecu callibrated by Ron ( If you read this Ron it will take some more weeks to get everything finished ).
car weight ( wet incl fuel & tools ) 560Kg. Weight ditribution 50/50.

anyway this is my baby :