High Compression Ratio ----> Detonation

Threaded Mode | Linear Mode

High Compression Ratio ----> Detonation

10-12-2007, 05:57 PM

Post: #7

Ivan141 Offline

Super Moderator

Posts: 6,358
Joined: Sep 2004
Reputation: 0

Pig-rich mixtures arent the best way to go, that could cause accelerated cilinder bore wear due to washing the oil off. If fuel and sparkplug measures dont help, you're probably better off just fitting a thicker headgasket. What's the point in having such high compression if you need to carry around additives and keep you're ears focused all the time..it's not a full-on race car right.

FABRICA MI DIEM, PVNC!

« Next Oldest | Next Newest »

Messages In This Thread

High Compression Ratio ----> Detonation - apardal - 10-12-2007, 10:46 AM

[] - dikolotour - 10-12-2007, 11:36 AM

[] - NoHachi - 10-12-2007, 01:51 PM

[] - apardal - 10-12-2007, 01:55 PM

[] - Eircamae86 - 10-12-2007, 03:11 PM

[] - NoHachi - 10-12-2007, 04:26 PM

[] - Ivan141 - 10-12-2007 05:57 PM

[] - apardal - 10-12-2007, 09:44 PM

[] - oldeskewltoy - 10-12-2007, 10:33 PM

[] - NoHachi - 10-12-2007, 11:29 PM

[] - robokill - 10-12-2007, 11:43 PM

[] - oldeskewltoy - 10-13-2007, 01:24 AM

[] - apardal - 10-14-2007, 03:46 AM

[] - NoHachi - 10-14-2007, 10:05 AM

[] - apardal - 10-14-2007, 02:25 PM

[] - jamiemirror - 10-16-2007, 09:21 PM

[] - robokill - 10-16-2007, 09:44 PM

[] - Ivan141 - 10-16-2007, 10:17 PM

[] - Lipinhu - 10-16-2007, 11:11 PM

[] - apardal - 10-16-2007, 11:21 PM

[] - oldeskewltoy - 10-17-2007, 06:07 PM

[] - apardal - 10-17-2007, 08:00 PM

[] - apardal - 10-17-2007, 11:23 PM

[] - Uzelac - 03-23-2009, 05:35 PM

[] - irishtwincam - 03-23-2009, 05:50 PM

[] - oldeskewltoy - 03-23-2009, 10:25 PM

[] - jondee86 - 03-24-2009, 03:49 AM

[] - irishtwincam - 03-24-2009, 11:27 AM

[] - totta Crolla - 03-24-2009, 11:20 PM

[] - totta Crolla - 03-24-2009, 11:26 PM

[] - GTRJazz - 03-26-2009, 12:57 AM

[] - jondee86 - 03-26-2009, 06:24 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	High-beam warning lamp	Mylesmck	4	1,610	07-21-2023 07:44 AM Last Post: banpei
	Engine stress at high speeds	gh0st	6	2,709	08-30-2022 07:11 PM Last Post: Power_uP
	82mm Stock compression Pistons	apardal	4	2,945	11-24-2021 04:26 PM Last Post: apardal
	4AGE 16V engine overheat when at high speed	chenfon	32	22,406	12-31-2020 06:39 AM Last Post: chenfon
	working out compression ratios	kazi	2	3,692	07-16-2019 08:22 PM Last Post: oldeskewltoy

User(s) browsing this thread: 2 Guest(s)