High Compression Ratio ----> Detonation

Threaded Mode | Linear Mode

High Compression Ratio ----> Detonation

10-16-2007, 09:44 PM

Post: #17

robokill Offline

Posting Freak

Posts: 2,827
Joined: Sep 2004
Reputation: 0

apardal set the check wire on turn the ignition to 13 degree instead of 10. adjust the fuel mixture (richer) and then unplug the check wire.

See if it is running between 16 and 20 degree. This worked fine for my engine. If timing is to low it will mess up you need to set it to more than 10 because of your cams.

Cars:
"99 Lexus IS200
"86 AE86 Kouki Panda Levin GT-Apex (restore project)
"84 AE86 Zenki Blue Levin (project racer)
Motorcycles:
"02 Yamaha R1
"02 Honda Hornet S
"08 BMW R1200GS

« Next Oldest | Next Newest »

Messages In This Thread

High Compression Ratio ----> Detonation - apardal - 10-12-2007, 10:46 AM

[] - dikolotour - 10-12-2007, 11:36 AM

[] - NoHachi - 10-12-2007, 01:51 PM

[] - apardal - 10-12-2007, 01:55 PM

[] - Eircamae86 - 10-12-2007, 03:11 PM

[] - NoHachi - 10-12-2007, 04:26 PM

[] - Ivan141 - 10-12-2007, 05:57 PM

[] - apardal - 10-12-2007, 09:44 PM

[] - oldeskewltoy - 10-12-2007, 10:33 PM

[] - NoHachi - 10-12-2007, 11:29 PM

[] - robokill - 10-12-2007, 11:43 PM

[] - oldeskewltoy - 10-13-2007, 01:24 AM

[] - apardal - 10-14-2007, 03:46 AM

[] - NoHachi - 10-14-2007, 10:05 AM

[] - apardal - 10-14-2007, 02:25 PM

[] - jamiemirror - 10-16-2007, 09:21 PM

[] - robokill - 10-16-2007 09:44 PM

[] - Ivan141 - 10-16-2007, 10:17 PM

[] - Lipinhu - 10-16-2007, 11:11 PM

[] - apardal - 10-16-2007, 11:21 PM

[] - oldeskewltoy - 10-17-2007, 06:07 PM

[] - apardal - 10-17-2007, 08:00 PM

[] - apardal - 10-17-2007, 11:23 PM

[] - Uzelac - 03-23-2009, 05:35 PM

[] - irishtwincam - 03-23-2009, 05:50 PM

[] - oldeskewltoy - 03-23-2009, 10:25 PM

[] - jondee86 - 03-24-2009, 03:49 AM

[] - irishtwincam - 03-24-2009, 11:27 AM

[] - totta Crolla - 03-24-2009, 11:20 PM

[] - totta Crolla - 03-24-2009, 11:26 PM

[] - GTRJazz - 03-26-2009, 12:57 AM

[] - jondee86 - 03-26-2009, 06:24 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	High-beam warning lamp	Mylesmck	4	1,613	07-21-2023 07:44 AM Last Post: banpei
	Engine stress at high speeds	gh0st	6	2,714	08-30-2022 07:11 PM Last Post: Power_uP
	82mm Stock compression Pistons	apardal	4	2,947	11-24-2021 04:26 PM Last Post: apardal
	4AGE 16V engine overheat when at high speed	chenfon	32	22,425	12-31-2020 06:39 AM Last Post: chenfon
	working out compression ratios	kazi	2	3,693	07-16-2019 08:22 PM Last Post: oldeskewltoy

User(s) browsing this thread: 2 Guest(s)