My 20v ITB installation

Threaded Mode | Linear Mode

My 20v ITB installation

01-01-2005, 02:38 PM

Post: #10

Ivan141 Offline

Super Moderator

Posts: 6,358
Joined: Sep 2004
Reputation: 0

As far as I know, most (except redtop) 4age's run the same 2,55kg/m2 fuelpressure. The standard 182cc injectors could support around 140bhp at that pressure running 100% dutycycle. At 80% that figure drops somewhat to the 115 to 120 bhp mark.
You really should try and keep an eye on the fuelmixture when running a standalone. A WBO2 readout should be standard equipment if you want to keep the engine in one piece.

FABRICA MI DIEM, PVNC!

« Next Oldest | Next Newest »

Messages In This Thread

My 20v ITB installation - Ian.G - 12-31-2004, 05:43 PM

[] - Squeejy - 12-31-2004, 06:04 PM

[] - Ian.G - 12-31-2004, 06:48 PM

[] - ZaX - 12-31-2004, 08:23 PM

[] - Squeejy - 12-31-2004, 08:50 PM

[] - Ian.G - 01-01-2005, 11:55 AM

[] - ZaX - 01-01-2005, 01:28 PM

[] - Mux213 - 01-01-2005, 01:52 PM

[] - Ian.G - 01-01-2005, 02:11 PM

[] - Ivan141 - 01-01-2005 02:38 PM

[] - Ian.G - 01-01-2005, 03:16 PM

[] - gon - 01-07-2005, 10:58 PM

[] - Ian.G - 01-11-2005, 09:37 AM

[] - mo-racing - 01-11-2005, 09:58 AM

[] - mo-racing - 01-11-2005, 10:00 AM

[] - Ian.G - 01-11-2005, 10:38 AM

[] - mo-racing - 01-12-2005, 08:58 AM

[] - Widar - 01-12-2005, 09:07 AM

[] - mo-racing - 01-12-2005, 09:40 AM

[] - The Doctor - 01-12-2005, 12:52 PM

[] - JFR - 01-12-2005, 10:46 PM

[] - Ian.G - 01-13-2005, 09:44 AM

The mess is gone... - Ian.G - 01-15-2005, 08:40 PM

[] - rikard - 01-15-2005, 08:47 PM

[] - Mux213 - 01-15-2005, 08:49 PM

[] - Widar - 01-15-2005, 10:37 PM

[] - Ivan141 - 01-15-2005, 11:09 PM

[] - Ian.G - 01-16-2005, 03:19 AM

[] - ZaX - 01-16-2005, 11:25 AM

[] - Striker - 01-16-2005, 07:06 PM

[] - Ivan141 - 01-16-2005, 08:43 PM

[] - Mux213 - 01-16-2005, 09:32 PM

[] - Striker - 01-17-2005, 12:41 AM

[] - Ivan141 - 01-17-2005, 01:13 AM

[] - Striker - 01-17-2005, 01:25 AM

[] - gon - 01-17-2005, 01:44 AM

[] - Striker - 01-17-2005, 01:55 AM

[] - AndrE86 - 01-17-2005, 08:45 AM

[] - Striker - 01-17-2005, 05:39 PM

[] - NoHachi - 01-17-2005, 05:54 PM

[] - s.bjelke - 01-17-2005, 06:03 PM

[] - Striker - 01-17-2005, 06:12 PM

[] - ZaX - 09-06-2005, 11:55 AM

[] - Ian.G - 09-06-2005, 12:42 PM

[] - ZaX - 09-06-2005, 12:49 PM

[] - SilentScope111 - 06-16-2007, 04:56 AM

[] - byd1380 - 06-18-2007, 02:19 PM

[] - robokill - 06-24-2007, 06:23 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	4A-GE 20V ITB bolt patterns	kjb	7	12,334	02-27-2016 01:23 PM Last Post: kjb
	How to install 20V ITB on 16V head	Mr.komp	7	12,038	12-28-2015 05:35 PM Last Post: pack
	Machining Pistons to run 20v head... And FCR's on a 20v?	PazzaAE86	2	5,193	09-15-2013 01:08 AM Last Post: jondee86
	20v itb inlet manifolds	totta Crolla	24	27,048	12-14-2012 12:21 PM Last Post: Bean
	4AGE 20v ITB vacuum instructions on Intecracing.com	JAVResistance	17	34,465	05-07-2011 05:50 AM Last Post: jondee86

User(s) browsing this thread: 6 Guest(s)