GOLDEN EAGLE VACUUM MANIFOLD

[Ian.G]

If you are on 20v itbs you will notice there is a vacuum nipple on each of them...take the vac lines from here into the vacuum collector. Or... you can tap nipples into the ITB adapter/manifold.

This was my old 4AGE setup..



I didnt use the outlets on the ITBS - the vac was taken straight from the manifold...but you can see the places on the ITBS themselves (have the short runs of blocked vac pipe on them).

Use the one-way valve on the golden eagle item to go to the brake booster, and use another outlet for the map sensor.

Are you going to try and run a std ECU ? if not you dont especially need the map sensor as you'll be able to map on throttle position.

Hope that helps.