clutch problem
|
08-12-2008, 11:20 AM
Post: #10
|
|||
|
|||
I'm searching for the cause of the same problem you have.
My hachi began to vibrate when the bushings have been changed out to prothane (for sure the problem was there before, but i didn't noticed anything of it until the harder bushings have been built in). After that i changed the tranny mount, because it was worn. But no effort. I've bought a tranny, changed it (new release bearing and pilot bearing, new clutch plate, pressure plate and flywheel), but it is the same (this tranny is not a new or renewed one, but the noise and vibration is exaxtly the same, so i think it's not the tranny). Now my diff is rebuilt i will put it back this week, but i don't think, that it could be the cause. I've ordered new motor mounts, they will be changed out at the end of this month or in september. And i will rebuild my tranny next year. So if i find out something i will inform you. Daily driver: AE86 - 1985 zenki levin |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
clutch problem - peter - 08-11-2008, 10:11 AM
[] - spinny - 08-12-2008 11:20 AM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Clutch pedal problem | andee17 | 3 | 4,496 |
07-25-2013 11:57 AM Last Post: jondee86 |
|
Clutch problem | Rascal21 | 4 | 5,394 |
05-31-2013 06:00 PM Last Post: Alex170984 |
|
4agZe problem solved - 99% IC problem | Okami | 41 | 35,024 |
07-12-2012 04:49 PM Last Post: Okami |
|
AC problem? Idle problem? | KD2229 | 3 | 4,653 |
08-19-2009 02:08 AM Last Post: KD2229 |
|
Clutch Master Cylinder and Clutch Slave Cylinder fitment? | christsang7 | 2 | 5,014 |
07-01-2009 07:48 AM Last Post: jondee86 |
User(s) browsing this thread: 27 Guest(s)