|
Compression test
|
|
09-13-2008, 10:53 PM
Post: #1
|
|||
|
|||
|
Compression test
I just fitted a pair of 266 degree 9.5mm lift cams, new head gasket, skimmed head. (4AGE blue top)
After having problems getting the engine started I decided to do a cold (could'nt get it going  ) compression test. All were around 150psi. Previously with standard cams it shows aound 175psi (warm) is this right ?I'm guessing there is some overlap but this would'nt be on the compression stroke should it ? My guess is that the cam timing is out, probably why it won't start and the reason for the low pressure readings. Thanks for any help with this. TC An analogue brain in a digital World |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Compression test - totta Crolla - 09-13-2008 10:53 PM
[] - totta Crolla - 09-14-2008, 08:25 PM
[] - totta Crolla - 09-15-2008, 10:09 AM
[] - totta Crolla - 09-16-2008, 02:51 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 82mm Stock compression Pistons | apardal | 4 | 2,719 |
11-24-2021 04:26 PM Last Post: apardal |
|
| working out compression ratios | kazi | 2 | 3,498 |
07-16-2019 08:22 PM Last Post: oldeskewltoy |
|
| How to test coil with igniter | DJexor | 2 | 7,699 |
03-22-2018 10:01 AM Last Post: Project D |
|
| Comp. Test - 20v Blacktop | hachirokkos | 2 | 4,736 |
01-10-2016 02:30 AM Last Post: hachirokkos |
|
| What is cranking compression on 10-1 4AGE? | oldeskewltoy | 2 | 4,670 |
03-24-2015 10:18 AM Last Post: ditn |
|
User(s) browsing this thread: 7 Guest(s)