levin too trueno

[spoz]

i did this i got the lights pannels and bonnet , you need the bumper brackets and u need the bonnet latch, other wie it dont line up . the head light plug straight up and the front indicators plug straight up the indicators come with diffrent plugs and only take wo of the 3 wires that the levin had becsuse the trueno dont hve a park light on the side they are on the front near the indicators depending o what model and bmper you have.

u can run the third wire from the sides down to the park lights at te front , i just did a trial and error with the indicators to find what wires did what.

once u ahve your lights working and indicators working you will run into the problem that ur lights dont go up and down.

once u have the pannels and light hooked up you going to need go to toyota and get 2 relay switchs

1 relay light retractor , part number 85964- 12010 its going to set you back about $120 big ones
2 light retractor control , part number 85963- 14011 and this one is aboutt he same $ 130

the parts will have to come from japan, and u will ahve to wait for 6 weeks to get them
This is what i did untill i got the guys at toyota to search what other cars had the same relay switchs in then, all the 81 to 85 celica's if they have pop up lights have the same relay switchs in them , so to save $250 go to the wreckers and try and find one of these old cars you see heaps of them around.they should be located at the front between the lights on a bracket, the other is under the dash.


once u have theres you will go to an aut electrician and he will say we need wireing diagrams and then u will go ok, then go home and start looking. i did this also to find out the e86 work shop manual has the wiring diagrams for every relay in the car but these two , and in no way shows u what wire gose to what pin.

so f anyone know the wireing diagram for these two relays. or has a trueno and wanta to take 5 mints to post the wireing on here that would save me alot of trueble and alot of othere people having the same problem

or email me if u have the diagrams for theses two relays

[email protected]