Threaded Mode | Linear Mode

LarsZ · 01-19-2007, 08:54 PM

I have the cad files for the adaptors.

jamiemirror · 01-19-2007, 09:00 PM

LarsZ, are these files received from Hen ?
If I have the correct files - this can make entire process simple and quick (and I think - little cheaper).

LarsZ · 01-19-2007, 09:03 PM

jamiemirror Wrote:LarsZ, are these files received from Hen ?
If I have the correct files - this can make entire process simple and quick (and I think - little cheaper).

I dont know who made the files, I'll send you an email with the files.

jamiemirror · 01-19-2007, 09:06 PM

Thanks ! I will compare them with Hen's drawings. If these files are NOT SolidWorks ones, I can process further without waiting Hen's permission (he wrote that he can't export files in DWG/DXF format AFAIK).

peter møller · 01-19-2007, 09:35 PM

Jamie....no specific hurry. But if you were to fabricate them, i´d take a set of your hands.

jamiemirror · 01-19-2007, 09:44 PM

Peter, already have the files (thanks to LarsZ!).
Will take a look at them, compare with drawings, have friend with RX7 FC here to test-fit - the only factor will be the time.
Will post here for progress.

robokill · 01-21-2007, 07:19 PM

Hey jamie,

R.hellenbrand has them as well. But he has difrent adaptors cause he made a fit plate for it on the studs ... I have pics but have to ask him if i may post em.

When you build em I want a set as well.

jamiemirror · 01-21-2007, 07:51 PM

Quote:But he has difrent adaptors cause he made a fit plate for it on the studs

I didn't understand well that.

Another question - about material. Steel or aluminium alloy ? I see that forum member already made such adapters from aluminium but is this strong enough - your opinions ?
There is one more thing - I presume that these adapters are designed do adapt RX7 4-pots to stock AE86 brake discs. I'm planning to use different (bigger) discs on my car anyways (some Prelude ones + PCD redrill). This is impotant due to different disc offset and diameter. Just FYI.

PS: If someone else wants a set - drop me a PM or better use this thread. Will try to deliver deadline and pricing information soon.

peter møller · 01-21-2007, 08:08 PM

jamiemirror Wrote:
Quote:But he has difrent adaptors cause he made a fit plate for it on the studs

I didn't understand well that.

Another question - about material. Steel or aluminium alloy ? I see that forum member already made such adapters from aluminium but is this strong enough - your opinions ?
There is one more thing - I presume that these adapters are designed do adapt RX7 4-pots to stock AE86 brake discs. I'm planning to use different (bigger) discs on my car anyways (some Prelude ones + PCD redrill). This is impotant due to different disc offset and diameter. Just FYI.

PS: If someone else wants a set - drop me a PM or better use this thread. Will try to deliver deadline and pricing information soon.

As far as i know, the kit normally includes rx-7 discs as well. Remember something about 280mm discs. They need to be drilled to fit the hachi pattern though, but i´m guessing thats minor stuff.

jamiemirror · 01-21-2007, 08:25 PM

Okay, then the adapters (shown on drawings above) are designed for RX7 discs AND calipers on AE86 strut(hub) ? Can someone confirm this ?

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	20v Blacktop conversion....	Mylesmck	0	405	04-29-2024 05:48 PM Last Post: Mylesmck
	Kouki to Zenki Levin grill conversion?	Mylesmck	6	2,039	02-08-2024 10:30 AM Last Post: r.ave
	AFM to Map Conversion	ps13michi	3	3,050	01-06-2022 10:34 AM Last Post: ps13michi
	Sub panel and rotary-button replacement for Levin -> Trueno conversion	gh0st	9	5,199	11-05-2021 08:17 PM Last Post: gh0st
	AE86 single wiper conversion	kazi	6	9,229	08-26-2017 08:47 PM Last Post: kazi