Corolla Levin Repair, Paint and Tune - WITH VIDEO

[rooty]

Thanks!

[apardal]

Another video

[rooty]

quick question mate, do you have any dyno data after installing open ITB's with that filter?

cheers

[apardal]

Nope. Might have something soon...

[harkes]

OMG that is a lot of transmission noise? Gearbox or diff?

What kind of brake setup are you running? Problems with fading?

[roco]

just read this whole thread from start to finnish, fair play dude, that is a serious resoration work, alot of work has gone in, beautiful car, well wear..

[apardal]

harkes, the noise comes from the diff. It is now disassembled and i'm trying to figure out what i'm gonna do with it.

I'm running front brembo rotors with ferodo ds2500 pads, stock rear rotors with pagid fastroad pads, goodridge brake lines and Ferodo Dot 5.1 brake fluid. All calipers and brake master cylinder were rebuilt. No fade at all.

Thanks roco!

[Emanuelae86]

very good

[apardal]

This topic is dying!!

I've made some improvements.

Bought a pair of Kent Cams with 298 duration and 9.4mm of lift.

Dynoed it and this is what came out:



Lowered ignition advance by 2 degrees



Comparison between 288 (7.5mm) Toda Camshafts, stock intake and kent cams with ITB's:



And 3 days later, there I was, Estoril racetrack.

Track Day footage!!

Need to change clutch, fix exhaust and big brakes.

For the brakes I've already ordered:



Best regards

[ZDoman]

Nice graphs and results man!