|
Crankshaft problem and what i need?
|
|
06-06-2008, 05:16 PM
Post: #1
|
|||
|
|||
|
Crankshaft problem and what i need?
The 20v chrankshaft will fit to 16v model with 40mm diameter of connection rods? i need the pistons but i only found with 20mm pin my is 19
|
|||
|
|
06-06-2008, 05:41 PM
Post: #2
|
|||
|
|||
Crankshaft problem and what i need?
pernati Wrote:The 20v chrankshaft will fit to 16v model with 40mm diameter of connection rods? no... the rod journals for both 20V engines is 42mm pernati Wrote:i need the pistons but i only found with 20mm pin my is 19 You have 19mm wrist pins?? Do you have a photo of the pistons?? Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
06-13-2008, 11:23 PM
Post: #3
|
|||
|
|||
|
Crankshaft problem and what i need?
TRD are 19 mm pistons are you sure?
Fully Restored 1985 Corolla GT-S 1987 328ci SR20DET Drift Car 1989 Honda Civic Si-R Current Project 2002 Corolla CE Daily Driver http://www.TheTunerSource.com |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Crankshaft stamping | Blaze0010 | 6 | 1,169 |
06-10-2024 10:16 PM Last Post: Blaze0010 |
|
| Which new bearings for ae101 4AGZE crankshaft&connecting | ditn | 4 | 7,078 |
10-31-2013 06:04 PM Last Post: ditn |
|
| 4agZe problem solved - 99% IC problem | Okami | 41 | 35,467 |
07-12-2012 04:49 PM Last Post: Okami |
|
| Maybe problem with TRD shock absorber and springs | Mattolo | 22 | 20,281 |
10-15-2011 07:40 PM Last Post: zenki |
|
| crankshaft timing belt pulley won't come off | Dino86 | 8 | 9,316 |
02-21-2011 02:05 PM Last Post: Project D |
|
User(s) browsing this thread: 2 Guest(s)