Disk Brake Conversion
11-15-2007, 06:00 AM
Post: #1
Disk Brake Conversion
How would i go about converting the rear brakes to disk I already have the Drum brakes off and the hubs out of the rear axle
[Image: AEU86 AE86 - Disk Brake Conversion]
as seen here
Find all posts by this user
11-15-2007, 08:37 AM
Post: #2
Disk Brake Conversion
http://www.toyota3tc.com/rear_brake_conversion_1.htm

Unless everything already bolts on...

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
11-15-2007, 09:58 PM
Post: #3
Disk Brake Conversion
Thanks that was very help and actually the way I thought about doing it just needed some reassurance. Respect!
Find all posts by this user
07-31-2012, 08:06 AM
Post: #4
Disk Brake Conversion
any idea where that link moved to?

Understeer is when the front end hits the wall.
Oversteer is when your back end hits the wall.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you!
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Blacktop conversion.... Mylesmck 0 456 04-29-2024 05:48 PM
Last Post: Mylesmck
  Kouki to Zenki Levin grill conversion? Mylesmck 6 2,153 02-08-2024 10:30 AM
Last Post: r.ave
  AFM to Map Conversion ps13michi 3 3,168 01-06-2022 10:34 AM
Last Post: ps13michi
  Sub panel and rotary-button replacement for Levin -> Trueno conversion gh0st 9 5,352 11-05-2021 08:17 PM
Last Post: gh0st
  AE86 single wiper conversion kazi 6 9,387 08-26-2017 08:47 PM
Last Post: kazi

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication