Hi from Texas

[cannabolic]

there's a lot info here about it.

search button

[pandae86hid]

welcome to the site man, fellow usa guy here. good choice on the car. if you want a good us forum than go to club4ag.com

[sho_shane]

I didnt want to open a new topic to ask a few Q's that have probly been asked a dozen times. I did a search and didnt find what I was looking for.

1. How do you do the sleepy eye conversion?
2. What other tail lights will fit in my car with no mods? The ones i have are ugly...

3. All these body kits I see all over ebay and other sites. Are they just bolt on or do you have some fab work?

[sho_shane]

One more thing.

Where can I kit a lip kit for my car? I see ppl with them but I cant find one anywhere?

[Ivan141]

Sleepy eye trueno's dont look too good.. the shape of the headlight units just makes it look awkward. If you want some nicer bumpers, look into the japanese models(which came with a separate spoiler lip), or just buy some kit off ebay, which is mostly a jdm-lookalike but a bit more extreme. At most you'll need to find or make some bumper supports to fit these bumpers, as they are different from the US spec.

BTW, all the things you ask for have been asked a gazillion times (as is usual on forums older than 2 years), so be a bit more patient while searching and you might find much more complete answers than the quick replies you'll get here.

[sho_shane]

Ok thank you for your ansers. Ill look better from now on. I dont want to be a bother.

[sho_shane]

I really am looking everywhere on the site. I do want to know more about putting carbs on my car. And if not carbs. Does any place make a aftermarket Intake Mani for the 16V?

[banpei]

I found this one through the search:
http://www.aeu86.org/viewtopic/carbureti...4ag/t/4426

[jamiemirror]

If you need intake adapter only - T3 have one, I made them too, other cheap option can be Ebay. I think there is also some Finnish company making these. Price range is $180-$250 for new one (sometimes even more).

[sho_shane]

banpei Wrote:I found this one through the search:
http://www.aeu86.org/viewtopic/carbureti...4ag/t/4426

Ya I found that one. But im really looking for more info to tell me if the carbs are worth it? Can I still make good power with a carb setup?