IAC valve
05-28-2010, 09:45 PM
Post: #1
IAC valve
i have i high idle on my engine and I'm talking about 1800-2000 rpm, and I'm sure that the Idle Air Control valve doesn't work, is there any way that this can be blocked so the engine can come back to a normal idle ...? and if so how can i fix this problem ?

'85 Corolla Sprinter Trueno GT-APEX
Find all posts by this user
05-28-2010, 10:31 PM
Post: #2
IAC valve
can't you try to clean it ?

Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
05-28-2010, 10:49 PM
Post: #3
IAC valve
How do i clean it. I just have to take it out and clean it but is there a special fluid to clean this ..?

'85 Corolla Sprinter Trueno GT-APEX
Find all posts by this user
05-28-2010, 11:47 PM
Post: #4
IAC valve
CoolinAE86 Wrote:i have i high idle on my engine and I'm talking about 1800-2000 rpm, and I'm sure that the Idle Air Control valve doesn't work, is there any way that this can be blocked so the engine can come back to a normal idle ...? and if so how can i fix this problem ?

Go inside the throttle body and find the idle air port. Its just in front of
the throttle butterfly at about 5 o'clock. Block the hole temporarily with
a rubber plug or even your finger (for testing). If the idle drops by
1000 rpm, then your thermostatic idle-up valve is stuck wide open (if
the idle only drops by 100 rpm, the problem is elsewhere).

You can block it off permanently and put up with poor cold starting and a
rising idle, or fix/replace the valve.

Cheers... jondee86
Find all posts by this user
05-30-2010, 08:22 PM
Post: #5
IAC valve
jondee86 Wrote:
CoolinAE86 Wrote:i have i high idle on my engine and I'm talking about 1800-2000 rpm, and I'm sure that the Idle Air Control valve doesn't work, is there any way that this can be blocked so the engine can come back to a normal idle ...? and if so how can i fix this problem ?

Go inside the throttle body and find the idle air port. Its just in front of
the throttle butterfly at about 5 o'clock. Block the hole temporarily with
a rubber plug or even your finger (for testing). If the idle drops by
1000 rpm, then your thermostatic idle-up valve is stuck wide open (if
the idle only drops by 100 rpm, the problem is elsewhere).

You can block it off permanently and put up with poor cold starting and a
rising idle, or fix/replace the valve.

Cheers... jondee86

Thanks man the valve was stucked so i will try to block it up permanently thanks man

'85 Corolla Sprinter Trueno GT-APEX
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  4AGE Valve Buckets Scored Steller Engineering 2 836 10-06-2023 05:34 PM
Last Post: Steller Engineering
  20 Valve Blacktop smoking after engine flush - why? RolanTHUNDER 2 1,306 11-30-2022 12:09 PM
Last Post: RolanTHUNDER
  HKS valve springs totta Crolla 3 2,099 05-25-2022 10:24 PM
Last Post: oldeskewltoy
  Valve clearance leon205gti 7 8,505 11-25-2016 03:24 AM
Last Post: oldeskewltoy
  16v oversize valve seats harkes 9 12,316 09-20-2016 05:04 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication