Threaded Mode | Linear Mode

Ian.G · 12-03-2005, 09:31 PM

Well,

more work on the car today. Its a bit depressing knowing that none of what I am doing at the moment helps to get the engine running but hopefully it will make the car better in the end.

Took the plunge and cut the wires to the unknown sensor in the dashboard so I could actually take the dash completely out.

My next mission was to rid the loom of the central locking device that was installed on the car. We wont be needing this anymore so I also took locking mechanisms out of each of the doors. The bundle of wires to control this thing was a mess. I have kept all the parts for this and I have a single remote key fob - if anyone wants this give me a shout.

Next I proceeded to take out all the the aircon and heating system. I cannot believe how much crap there is behind the dash for this stuff. Needless to say it wont be going back in. Dingy my friend has found me a very simple system that will go in its place. A lot smaller and a lot lighter.

With the heater/aircon stuff out of the way it was time to remove the rest of the sound deadening stuff on the firewall along with all of the matting. Another crap job but its done now.

The Freedom ECU is now out of the car and its up for sale.

Tomorrow the painting starts. Can't wait to finish all this crap.

Widar · 12-03-2005, 09:46 PM

Nice work!

What colour are you going inside?

Ian.G · 12-03-2005, 09:48 PM

black m8 - to match the back half which is already painted.

Widar · 12-03-2005, 10:26 PM

Ian.G Wrote:black m8 - to match the back half which is already painted.

Aah. Makes sense.

Looking forward to seeing the final result!

Matt Skinner · 12-03-2005, 10:40 PM

blaaargh i hate wiring!

**Ivan141** · 12-04-2005, 03:11 PM

That does look like a mess indeed. You neednt have worried about that so called sensor in your dash...it's just a connector, that little pigtail that's hanging loose on top of the dash is supposed to be plugged in it I s'pose..

Ian.G · 12-20-2005, 03:33 PM

Not a great deal of interest has happened recently - its all boring stuff that didn't seem bothering with.

on Sunday I removed the ENTIRE wiring loom from the car as its kinda become surplus to requirement. All I have to do now is remove the fuel lines from the transmission tunnel and the fun can begin with the gas axe

All being well I should find out if the hachis xmas present will arrive soon.

The car is now definately going to be off the road for 2-4months - but it should be worth it. If anyone has a good condition or new 4.7 crownwheel and pinion give me a shout.

I will have LOADS of 4AGE and other corolla bits for sale soon.

**Ivan141** · 12-20-2005, 03:47 PM

Let me try out some math: (transmission tunnel + gas axe) = F20C install?

**Dorito86** · 12-20-2005, 03:52 PM

I think you're an expert mathematician Ivan :wink:

**nmwisima** · 12-20-2005, 03:54 PM

Post em here 1st man. Like 2-3 days priority. If you post the stuff for sale firstly @ Driftworks it will dissapear immediatelly.

Any LSD available?

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Track AE86 Build from south america	Nurburgring	3	8,059	10-30-2013 07:31 PM Last Post: BOOMEX
	Ae86 Levin drift project.	filip.alin	7	9,641	01-20-2013 03:05 PM Last Post: filip.alin
	86er's Track rebuild N2.??? Finally an update page 8	86er	191	256,417	03-25-2012 10:05 AM Last Post: bozu
	(AUS) 8age trueno track monster!	green_boy_91	48	56,596	02-22-2010 01:47 PM Last Post: green_boy_91
	KP61: The track fridge	127 Boy	20	30,182	01-04-2010 01:02 AM Last Post: The Doctor