Clutch Master Cylinder and Clutch Slave Cylinder fitment?

[christsang7]

Does anyone know can I use a AE111 Clutch Master Cylinder and Clutch Slave Cylinder on my Kouki AE86 without any modification?

[jondee86]

I don't know for a fact, but I would consider it extremely unlikely. The
AE86 slave bolts to a boss on the side of the bell housing, and the fixing
holes would need to be identical... and the bore size... and the alignment
of the hose connector. The master also has to fit the existing mounting
holes (unless you don't mind drilling) and again the bore size and pipe
tappings need to match for a bolt-on installation. Good luck

Cheers... jondee86