Levin Coupe from Croatia - NOW SR86 with IRS

[ZaX]

Looks gooooo to me!
CA18DET fits nicely in engine bay.

[JonT]

Boy you're a quick worker, and converted to right hand driva at the same time.

[ZaX]

2 jont: you are missing some smilies

[JonT]

Never let them know if your joking.........

[ZaX]

Mali update, promijenio ulje u diffu i getribi


puno smeca na metalnom cepu. trosila se spera ove zime



Novo ulje, 1.3 litre LS = Limite Slip, NE-sinteticko



Shortshifter i novi selen vs original


Skidanje starog selena


I upresavanje novog uz pomoc fena.

Usput sam stavio ATF ulje za automatske getribe i sad se getriba puno manje cuje i ono najbitnije, lakse se saltaju brzine.

[ZaX]

I refreshed my coilovers today


Painted strut housing


This used to be brand new ae92 koni half year ago :-/


This is my summer setup, ae92 short strokes, 8kg/mm coilovers, T3 RCA's, spacers


And still waiting to install bushings.
I have mental preparations to do this for last 7 days.

[BOOMEX]

Good job and good luck! :wink:

[Ivan141]

Just follow the write-ups and pray to god you dont have to take the grinder to those bolts.. You probably take the control arms off more often than most of us so it shouldnt be a problem. You can whack the arms in place with a big rubber hammer (or like me with a hammer and piece of wood).. I know you are more than qualified to get the job done (me mux and robokill managed somehow).

[ZaX]

How I spent the weekend


My new garage!


Rear end first.


Dual swaybad mod


New bushing won't go in, so i just used 2-part TRD bushing i got from somwhere


New custom made adjustable panhard rod


Endlinks with new bolts


I had to grind away 4 bolts. Fastest way imho




End of the day one

Day 2, sunday


Start


My winter setup


dissasembling


Half way down.


Time to bolt-on


Bigest problem were these tie rods


Done!

Imprsions in few days after aligment job!

[jamiemirror]

Pls make it article !