My Drift project - 83' Trueno coupe

[doggy]

Time for Update Finally - there was A LOT of work done... Basicly - i finished with all the metal works, all the welding works, and finally finished with bottom of the car.. so starting from Monday i will try to get it to one piece

Here are some pics of the process:

My SSR MKII Came home 14x7.5 ET-12

Also - got some nice Tires for them


More toys - Adjustible tension rods, BOSCH external fuel pump, Swirl pot, 555cc Injectors, External 40mm WG....


My Custom Aluminium Radiator / IC for the V-mount setup is finaly at home too


And here is some Arch work:






Heres the Front finished and on the Right height of the car



Welding all the chasis:



After all the welds - some anti rush epoxyd primer:



After primer dried up complietly - lots and lots and LOTS of cleaning....



And first layer of protective structural paint:




After it dried - few more layers of paint:



And for the final - all the chasis was filled with Anti-rust / water rejective Wax / oil (dont know how its called in English propertly )





After fill up - car was rolled to all the different angles just to be sure wax got in every corner of the chasis Now im done with the bottom Finally!!!