My braaaakes, what about yours? [brake topic]

[Bravothreezero]

Brakes fixed, engine fixed. I'll try to be less of a noob and more a maintainer I didnt drive it without oilpressure though, hope it counts.

As for the brakes, I decided to renew them and postpone anything fancier like most of you guys have. Main focus now is rust and the suspension.

[Gtsi-R]

where to buy Project mu HC + pads ?
can only find a shop:

http://www.project-mu.com.au/en/products/pad_hcplus.php

but that is in australia, not around the corner and 345 au dollars? ?

can purchace black dimond rotors @
http://www.speedequipment.nl/rem_blackdiamond.html

for drilled and grooved euro 210,- sounds reasonable..

anny other idea's? the pads look verry expensive to me!!! and shipping is not even in!

regards roel

[Project D]

for Project µ -> RHDjapan

[makkuro]

like said project D
rhdjapan

plus, there is a discount on them
they are at 166€ without shipping. it is very hard to find cheaper.


here is the link
http://www.rhdjapan.com/project-mu-hc-hy...pads-50678

[Bean]

I don't know why all the people are so fond of RHDJapan when http://www.perfectrun.jp is always cheaper and can get you everything even when not listed in the shop as longs as it's made in Japan.

[makkuro]

Bean Bandit Wrote:I don't know why all the people are so fond of RHDJapan when http://www.perfectrun.jp is always cheaper and can get you everything even when not listed in the shop as longs as it's made in Japan.

i did not know that site!
i am going to take a look.
thanks

[Eircamae86]

Heard very good things about T3 willwood kit, waiting on mine

[Ivan141]

The wilwood kit is nice, but I get the feeling these brakes do not like prolonged periods of inactivity (they have no piston dust seals). The trueno has developed some crabbing under braking recently, after being parked in the garage for months.

[Bean]

maybe you can opt for other wilwood calipers (Dynapro series) as they have dust seasl, anyway in my humble opinion the bigbrake kits are overkill for most people.

did a bit more research - if T3 is using the 120-6806 caliper , one could switch it to 120-11481 which have dust boots but else are very similar but slightly more expensive... the T3 mountin bracket should work without any modifications as far as I'm concernd

[Gtsi-R]

thanks for the web adresses guys, helps me "save" little money on the pads! will store sites for favorites!

regards,

Roel