Need a little help from you swedish guys....
03-05-2006, 09:23 PM
Post: #1
Need a little help from you swedish guys....
http://www.blocket.se/vi/7301571.htm?ca=10_s

Found this turbo'd 3K KP60 for sale in Sweden, anyone who can translate it for me? It sounds quite fun to me, turbo'd 3K, open bov etc. etc. Smile

[Image: AEU86 AE86 - Need a little help from you...h guys....]

"It's all about the heart, the people who focus on parts, turbo's and all that stuff...they're just losers."
-Shinji Minowa
Find all posts by this user
03-06-2006, 09:12 AM
Post: #2
Need a little help from you swedish guys....
Man there´s a lot of info there....
1,3l motor MED Turbo
*1.3 liter turbo*
urfrästa förbränningsrum för sänkt komp förhållande.
*Modified combustion chamber for lowered CR*
Laddtryck 1,3-1,5 bar ! = rör på sig...
*1.3-1.5 bar boost=it moves Smile*
Extraktorgrenrör
*?*
Saab 9-5 Turboaggregat
*Saab 9-5 Turbo charger*
Original bottendel
*OEM Bottom-end*
Annat svänghjul (5K) så Sinterlamellen fick plats 200mm
*Different flywheel to accomodate 200mm sinter metal clutch*
Bränsletrycksregulator
*Fuel pressure regulator*
Tryckförgasare som är modifierad
*Modified pressure carburator*
Ändrad tändning
*Modified ignition*
Intercooler
*Intercooler Smile*
Laddtrycksmätare
*Pressure gauge*
GROVT välbyggt avgassystem
*Very nice modified exhaust*
Volvo 240 BAKAXEL med nya bromsar, upphängd i Toyota "4-link" EJ lamelldiffad
*Volvo 240 rear end with new brakes, mounted on toyota 4-link. NO LSD*
4v original låda
*4V OEM transmission*
Lite rost finns på karossen...
*A bit of rust on shell*
OBES !!! går EJ att BES MED TURBO !!!!!
*NO TÛV WITH THIS SETUP*
Gått 15.23s / 141km på Tullinge 2001 !! tidkort finns. med Toyota bakaxeln.
*1/4 mile at 15.23/141km/h with toyota rear end*
MYCKET rolig att köra!! torkar av betydligt Dyrare bilar med lätthet...
*Very fun car to drive, faster than more expensive cars*
X-tra motor finnes mm
*Extra engine as part of package*

My evil Red/Black Panda
http://www.bilgalleri.dk/html/gal_visbil.asp?ID=12832
My current JDM AE86 project
http://www.bilgalleri.dk/html/gal_visbil.asp?ID=31609
Find all posts by this user
03-06-2006, 03:22 PM
Post: #3
Need a little help from you swedish guys....
Extraktorgrenrör

could it be an external wastegate or something?

Sounds fun to me, and 8000 swedish thingies, that's around 800 euro, right?

"It's all about the heart, the people who focus on parts, turbo's and all that stuff...they're just losers."
-Shinji Minowa
Find all posts by this user
03-06-2006, 03:52 PM
Post: #4
Need a little help from you swedish guys....
The Doctor Wrote:Extraktorgrenrör

could it be an external wastegate or something?

Sounds fun to me, and 8000 swedish thingies, that's around 800 euro, right?
I think it may have something to do with the downpipe....."grenrör" is an exhaust manifold.
Yes 8000 is apprx 800euro´s. Not too bad really.

My evil Red/Black Panda
http://www.bilgalleri.dk/html/gal_visbil.asp?ID=12832
My current JDM AE86 project
http://www.bilgalleri.dk/html/gal_visbil.asp?ID=31609
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Need help........ Andreas 5 7,122 10-16-2006 06:56 PM
Last Post: Erik_dk
  need danish help delange 10 11,964 05-24-2006 08:49 AM
Last Post: Ivan141
  Listing of Swedish Hachi´s KristianAE86 42 54,271 05-13-2006 10:56 PM
Last Post: S.K.

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication