Newbee: Calavera
11-20-2005, 03:32 PM
Post: #1
Newbee: Calavera
Hi everybody,

A little bout myself
My name is Quoc, 22 years old. And i'm the one who bought the black AE86. I;m very excited about it, cause the AE86 is truly an ICON for the driftcars Tongue It was always a dream to own one levin or trueno. And now I finally have one Smile
Furthermore, I'm still studying, just have to graduate. Fan of driftcars, jap cars and fast cars Smile

The car:

Well this is it:

[Image: AEU86 AE86 - Newbee: Calavera]
[Image: AEU86 AE86 - Newbee: Calavera]

It;s a GT Twin-cam.
According to the display it has run 350k km. But according to the seller it has a new engine with 90k. And I've to say... it runs very very smoothly... no weird sounds around the engine. Thumbs up!
It does has somewhat rust on the rear end... but hey, it's a car build 1984! So i have to work on this.
Nice tires, good behaviour in the corners and a lot quicker than i'm used to. Slightly lowered, apparently stronger/ more progressive shocks. And original toyota spoilers.. yeeeeeaaah Thumbs up!


My daily car and used-to-be project Smile
I also have 2 Toyota Starlets EP71. One of them was a project to custom convert this 2E engine to turbo engine. With help and with parts of my friends we started in Januari. (the parts were from a different brand actuallyTongue, but hey... it works for me) The progress was about 60%. I already had every part i needed to build it in. Including a lasercut metal head gasket to lower the compression (if i'm saying this correctly Tongue ) I even got my EP71 Turbo S bodykit from japan. And alot of other stuff.

A short list of my stuff i've done to my daily car in prep for the conversion:
- lowering springs -40mm
- GAB front swaybar
- Yellow Koni Sports shock front and rear
- Turbo S OEM front strutbar
- Cusco Camberplates
- Cusco Lower Arm Bar
- Cusco rear strut bar
- 195/55-R13 Semperits with R5GTT PH2 rims Tongue
- P7S vented brake disc system in stead of the standerd solid discs and brake calipers with Apexi brake pads. Damn, what a difference, before and after!

Already ordered, but not yet shipped
- Whiteline custom rear sway bar
- Whiteline Castor-kit
- Whiteline adjustable Panhard-rod

And had chosen not to install the full bodykit untill the conversion was finished. So it looks very standaard, but you'll be suprised bout the corner behaviours Tongue It drives super with the setup i already have... it only missed the speed and torque Smile

But alas, I just threw away these turbo plans as soon I saw this AE86 for sale. So I arranged a meeting on very short notice. And bought it.
I hope to learn a lot bout the AE86 in a short while, it's a bit different than the simpel carb engine with no ECU at all.

Well this about it... A bit longer visit card... But hey, I think I've introduced myself properly this way Smile

Cya laterz,

Quoc / Calavera
Find all posts by this user
11-20-2005, 03:41 PM
Post: #2
Newbee: Calavera
Welcome! Wave
Nice zenki Levin you got there! Smile

[Image: AEU86 AE86 - Newbee: Calavera]
Find all posts by this user
11-20-2005, 04:18 PM
Post: #3
Newbee: Calavera
Welcome! Wave
Good to see you found your way here. And judging from what you are writing the car is in good hands. Tongue

1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:
[Image: AEU86 AE86 - Newbee: Calavera]
Visit this user's website Find all posts by this user
11-20-2005, 06:11 PM
Post: #4
Newbee: Calavera
Hey

Welcome to the forum.. Nice looking levin.. And true, sounds like its in good hands with you Smile

[Image: AEU86 AE86 - Newbee: Calavera]
AE86 Project
Visit this user's website Find all posts by this user
11-20-2005, 06:19 PM
Post: #5
Newbee: Calavera
Very Nice. Wellcome.
Hope you become a tactical here Smile

danielvanderwoude Wrote:looks like the nmwisima joke saved you in the end
[Image: AEU86 AE86 - Newbee: Calavera] http://www.jdmbits.com
Visit this user's website Find all posts by this user
11-20-2005, 06:44 PM
Post: #6
Newbee: Calavera
Heey Calavera!
Now i know why you're selling the Turbo S parts Big Grin

Welcome onboard!


And in some way i think the starlet P7 is the same as the AE86.
It doesn't look fast, but with some suspension mods, you can scare people Smile

"It's all about the heart, the people who focus on parts, turbo's and all that stuff...they're just losers."
-Shinji Minowa
Find all posts by this user
11-20-2005, 07:58 PM
Post: #7
Newbee: Calavera
Welcome dude, nice to see that black beauty is in some good hands!

Good luck fixing her up, hope we'll be seeing pictures of the work Smile

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad
Find all posts by this user
11-21-2005, 02:06 AM
Post: #8
Newbee: Calavera
I forgot to tell, I did buy this car but I do not have it yet...
There are some paperwork needs to be done before I can actually pick it up and drive it Smile Can't wait till that day... I hope this upcoming weekend.
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 10 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication