Oil cooler kit

[izanagi]

(05-25-2016 11:23 AM)pack Wrote:  I would't advice you to buy a "kit", unless it is a branded kit like a HKS, Greddy or something like that....

My advice, in my opinion of course is for you to build one.....

Get an oil sandwich, some fittings buy an oil cooler and get it done!

You have from demon tweeks the MOCAL sandwich plates (that you can adapt to fit a sensor for oil temperature as i did... They are pretty cheap actually...

Get an oil cooler from ebay (random brand should do the job)

Get some fittings (decent ones to avoid oil leakage)

And you're done!

I saw the Mocal. Good price.
Can I buy the one with temp sensor and fit a sensor later or the hole is open and I need absolutely buy and fit the sensor to close the hole ?
Thanks

---

(05-25-2016 04:41 PM)Bean Bandit Wrote:  I personally like the relocation versions. Easier to change the filter and you can als move it away from the hot header.

PS: I agree, ebay stuff is fine, just make sure to seal it properly

I heard that relocate the filter could starving my engine and loosing the pressure oil when I'm drifting.
It could damage my engine.