Rebuilding T50 Gearbox "synchro job"

[harkes]

Hi

I cannot seem to find any info on this subject???

Any way, i have the know problem of not beeing able to downshift to 2nd without pressing on 1st. Otherwise the gearbox runs fine. I believe i face a "synchro job" but cannot find any info on this? Has anyone done this before - I could use some advise

- Niels

[apardal]

It's easy if you have a press nearby. You should spend around 60€ if everything else is fine.

You will need (almost for sure) 1st and 2nd synchros (around 15€ each) and the gasket kit (20€).

If everything is not so fine, it is also possible that one sleeve (65€) or one bearing (around 90€) needs replacement.

The assembly is not very hard although it requires to read the manual carefully.

Hope this helps

[harkes]

Have you overhauld yours yourself? This manual - have you got a link to it?

[Jan Pedersen]

Toyota Service Manual

[totta Crolla]

Here is a link:
http://forums.club4ag.com/topic.asp?ARCH..._ID=119687
good luck