Smallport inlet manifold
11-18-2021, 10:38 AM
Post: #1
Smallport inlet manifold
On the face of it, l admit this may sound a bit daft but hear me out!
Has anyone tried fitting a un-modified smallport inlet into a right hand drive AE86?
The regs to which l must now conform forbid any type of inlet manifold modification and l have just aquired a jewel of a smallport engine?
Basically the throttle body would face the wrong way!

An analogue brain in a digital World
Find all posts by this user
11-18-2021, 01:20 PM
Post: #2
Smallport inlet manifold
You could try for the plenum flip instead of cut and shut, the welding will be less apparent. Some grinding and sandblasting might also hide the welding from the casual observer.
These laws sure make life difficult.

Verstuurd vanaf mijn Pixel 4a met Tapatalk

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
11-18-2021, 05:00 PM
Post: #3
Smallport inlet manifold
I agree the flip well executed might be the best solution. You will have neigh on no space to route the airflow from back to front. Certainly not with a silicon hose. You might be able to redirect the flow with a metal contraption but it would be less than ideal.

AE86 ex-daily
Visit this user's website Find all posts by this user
11-18-2021, 10:23 PM
Post: #4
Smallport inlet manifold
Ideally flipping it would be done with a TVIS top half.
I wonder if that might be possible?

An analogue brain in a digital World
Find all posts by this user
11-19-2021, 09:36 AM
Post: #5
Smallport inlet manifold
If you have both, you could measure them up. Havent seen it done before but I would agree that it would look more original.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
11-19-2021, 11:50 AM
Post: #6
Smallport inlet manifold
I did find this picture in a bigport to smallport club4ag thread:
[Image: AEU86 AE86 - Smallport inlet manifold]

1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:
[Image: AEU86 AE86 - Smallport inlet manifold]
Visit this user's website Find all posts by this user
01-17-2022, 05:14 PM
Post: #7
Smallport inlet manifold
(11-18-2021 10:38 AM)totta Crolla Wrote:  On the face of it, l admit this may sound a bit daft but hear me out!
Has anyone tried fitting a un-modified smallport inlet into a right hand drive AE86?
The regs to which l must now conform forbid any type of inlet manifold modification and l have just aquired a jewel of a smallport engine?
Basically the throttle body would face the wrong way!

There MIGHT be room... You would need to run a 90 degree elbow... and see if you can make it fit..........

the plenum swap worked quite well in my car

[Image: AEU86 AE86 - Smallport inlet manifold]

[Image: AEU86 AE86 - Smallport inlet manifold]

[Image: AEU86 AE86 - Smallport inlet manifold]


[Image: AEU86 AE86 - Smallport inlet manifold]

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Smallport coil totta Crolla 2 1,709 08-12-2022 11:03 AM
Last Post: totta Crolla
  4A-GTE 7-rib smallport nyberrg 5 6,170 05-24-2017 09:24 PM
Last Post: krullibull
  Smallport Fuel Rail Alex170984 2 4,527 11-19-2016 08:44 PM
Last Post: Alex170984
  Smallport Head swap Alex170984 9 9,031 06-09-2016 12:11 PM
Last Post: ZDoman
  4A-GE: Bigport with smallport fuel injection nyberrg 7 11,366 06-13-2015 05:00 PM
Last Post: nyberrg

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication