Stalkers AE8* project long time
|
09-16-2010, 04:09 AM
Post: #1
|
|||
|
|||
Stalkers AE8* project long time
Well thought I had better start a project post here
Bear in mind that it may look like a lot has been done...these photos are over the space of a year or two and just rolled into one post LOL!! This is what it came with when I brought it.... RUNNING GEAR 20v 4age Alloy ram tubes Link ECU 2.5" mandrel bent exhaust T50 gearbox 4:3 lsd Shortened Koni's on the front, and shortened Munroes on the rear Lovell super low springs all round BODY: Blue with a Purple pearl Fiberglass bonnet and rear hatch Autosport rear seats and door cards Front, rear, and B pillar strut braces TRD front lip Pics: Its an 85 that the old owner went and put 86 everything into it... Ok, so, here were the ripped old seats that came with the car when I got it. Has made such a difference of the inside of the car!! Well, I got board...so I stupidly listened to the flatties and went and brought myself another engine! :lol: Ok, so now for the full story..... After days and days of research, and having the flatties tell me that I would miss not having boost, I thought ok, ill build myself a 4agTe, plus I can learn all about engines while I build it (im as mechanically knowledged as Brittany...well not quite, but ya get the drift), so I found a suitable 20v 4age on tard me for sale and brought it. Went to supra fest over here with the gf's supra and took my AE along as it will be the last time this drives under its own power until the new engine goes in. I absolutly love this pic!!!! Time for some car parts to start arriving!! Specs: KKK T3/4 Turbocharger Rated to 500hp Compressor Specs: to4e cover 3" Inlet 0.5a/r 56mm Inducer 83.5mm Exducer!! Turbine specs: T3 turbine housing 0.7 A/R 3" outlet V-Band TWIN entry Turbo Flange for fast spool 65mm Exducer Polished Compressor casing K27 Oil cooled core, Wet floating bush bearings The plan is to strip the car back to pretty much the bare shell, tidy up the small rust parts around the rear guards, take out the door looks, prep the engine bay for de-looming etc (plus a few others that im going to keep quiet until I have done them hehe)...and the have it all ready for painting. So far we got up to removing everything off the rear all the way forwards to the dash. It was well after midnight and it was a week night, so we thought best to stop there and we can continue on next time. Heres a couple of pics to give ya the rough idea... The joys of having a flatty that works in removals....LOTS OF BUBBLEWRAP!!! :lol: And the best part of all that we found (well, didnt find) in the boot, was...NO RUST!!! ENGINE: As for the engine side of things, that is all going good. I went down today and dropped off the new oil pump, toda cams, and cambelt. They are going to make a start on the rebuilding of it now, so that should be ready in a few weeks. Woot!!! They have gone through and balanced everything! Decked, skimmed, well yea, everything to the engine, so once its done, it will be a fully blueprinted and balanced engine. I basically thought that I want to do it properly (even thou its costing me my left testie) and make it as reliable as possible. Heres some pics of the drop dead sexy clean engine parts lol... Forged conrods Forged pistons Fully rebuilt head Theres no pics of the actual block itself as that was tucked away at the back of the shelf, and the poor guy had already pulled all these parts out for me to take pics of, and I didnt have the heart to ask him to pull the heavy block out too lol. We are 95% done on the engine bay de-looming. A HUGE thanks to my best mate Stolic for all the countless hours spent on the car (so far :lol: ) Heres a pic of the test engine sitting in the car just so we can finish off the wiring: Also working on the water system at the moment. Have some secret squirrel stuff been done on that. Will show once thats all done too. woot! I ordered an intake from Ebay on Tuesday, and its just arrived...not bad to say it came from the other side of the world in 3 days. Got this Gilmore kit to go on: Also ordered one of Bazdas very nice clutches: Thanks Stolic for all the hard polishing: (will be adding a carbon cover once they arrive) more parts arrived... Yay, custom made bumper is done and ready to be picked up..... Well they have finally arrived!!! 6 weeks wait, and it has been so worth it! The rears have the most dish that Works make in the Equip series. (the supplier said he had never seen ones this size before! lol) 133mm of dish baby...YEA! :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: Specs: Fronts: 15 x 8 -28 offset Rears: 15 x 9 -66 offset (yep, -66 muhahahhahahhahahahhaha) I finally got a chance to put one of the wheels one the back. Surprisingly they dont stick out as far as what I was thinking they were going to :lol: It sticks out about 70mm outside the guard roughly Have ordered the brake kit and some suspension parts from TTT in the US, so just waiting on those parts to arrive. Car is on hold at the moment as we are working on the gf's supra to get that all ready and running before the drag season starts over her (and also before a toyota forum megameet in 4 weeks time) |
|||
09-16-2010, 09:56 AM
Post: #2
|
|||
|
|||
Stalkers AE8* project long time
What seats are those, Recaro copies?
And the wheels on your first pics, what are they? Sharak? danielvanderwoude Wrote:looks like the nmwisima joke saved you in the endhttp://www.jdmbits.com |
|||
09-16-2010, 10:15 AM
Post: #3
|
|||
|
|||
Stalkers AE8* project long time
Heres some inspiration....
http://www.skynet.ie/~eireae86 |
|||
09-16-2010, 02:12 PM
Post: #4
|
|||
|
|||
Stalkers AE8* project long time
Yea the seats are just cheap Chinese knock-offs of recaros. Surprisingly comfy lol.
Im not sure what my old wheels are. Is there any way to find out?? Wow, that engine looks awesome!! Dam I wanna get mine done hahah |
|||
09-17-2010, 10:04 AM
Post: #5
|
|||
|
|||
Stalkers AE8* project long time
I m pretty sure they are Sharak.
Any writtings one the inside? What specs are they, might have a buyer for them. danielvanderwoude Wrote:looks like the nmwisima joke saved you in the endhttp://www.jdmbits.com |
|||
09-17-2010, 10:10 AM
Post: #6
|
|||
|
|||
Stalkers AE8* project long time
Ill have a look tonight when I go back into the "man cave" (aka garage) and see what I can find.
|
|||
09-17-2010, 01:26 PM
Post: #7
|
|||
|
|||
Stalkers AE8* project long time
The wheels up there are Bridgestone Potenza mesh. My mate in Aust has the same type in 15x7
(are yours 15x6.5?) Coincidentally he too is running a 20V Turbo now! RokuSteady : Shakotan - Tsuraichi - Hippari - Onikyan : 神奈川 様式 |
|||
09-27-2010, 06:41 PM
Post: #8
|
|||
|
|||
Stalkers AE8* project long time
awsom project .. exitet to see moor in the future
|
|||
09-28-2010, 12:45 AM
Post: #9
|
|||
|
|||
Stalkers AE8* project long time
irishtwincam
you guys like this toyotas to much.like puerto rico..we steel on the old school... |
|||
11-23-2010, 03:44 AM
Post: #10
|
|||
|
|||
Stalkers AE8* project long time
I was going to say that I have done some more work on my car...but that would be a lie as I just stood there and made/drunk coffee while my mates did all the work lol
In my defense, I was out at dog training and came home to find them working hard! *so a huge thanks to them for there work!!!* old suspension coming out to make room for shiney new suspension. Last night we dropped out the whole front suspension, swaybar etc etc and will sit down and clean that up and give it a coat of paint to look new again. Yay for shiney stuffs!!! Just painted the inside of the guards, and will sit down and paint the control arms etc once I pick them up from getting all the old bushes pushed out. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
time to get her back on the road.. | worholm | 4 | 6,345 |
01-21-2017 09:33 AM Last Post: worholm |
|
Stalkers daily AE85 - 7AGE | stalker | 32 | 43,805 |
12-28-2011 02:28 PM Last Post: stalker |
|
OST-015: The long and winding road..... | oldeskewltoy | 19 | 26,102 |
12-21-2011 02:50 AM Last Post: oldeskewltoy |
|
The Long road to D1 | Dogs Danglies | 20 | 20,106 |
11-13-2005 07:44 PM Last Post: Dogs Danglies |
User(s) browsing this thread: 4 Guest(s)