Threaded Mode | Linear Mode

JonT · 06-25-2005, 12:06 PM

Pictures of the EG6 kit, 25,000 Yen

Denmark · 06-27-2005, 12:56 PM

I have just ordered a set of Mintex 1155,

Have any of You tried this?

regards,
Skassa

**Mux213** · 06-27-2005, 02:13 PM

Skassa,

Whats the difference between 1144 and 1155? Or is that a type?
How much where they and where did you order them?

Denmark · 06-27-2005, 02:22 PM

1144 is designed for road,light race

1155 is designed for rally trackdays. not good when cold

1166 is designed for pure race and will not work cold

I hope i can use them as a everyday pad,but i will see,it was just if others had tried them ,and had some comments to them.

I ordered them here in Denmark at a local grosist,and the price is around 70euro

Skassa

**Mux213** · 06-27-2005, 02:35 PM

Not to bad..

I am thinking of getting 1144s but not sure where I should order them...

Knudsen · 06-27-2005, 05:44 PM

I just want some, that doesnt squeek and squirl... Its really annoying Angry

Any suggestions? I need som new pads for the front pretty soon, as a MOT is in the near future Confused

**Ivan141** · 06-27-2005, 06:22 PM

Use coppergrease on the back of the pads...I havent heard my brakes squeel in a long time myself..

Denmark · 07-22-2005, 09:53 AM

Do any of you know how wide a disc,that can be used with the OE caliper?

There are some c-class disc ,that are 285x22.and they are easy to redrill,becourse the MB holes are drilled on a 105mm pcd

And i wonder if it can fit the 22mm instead of the 18mm ,is there room for it?

Regards,
Skassa

jamiemirror · 07-22-2005, 10:00 AM

Denmark Wrote:Do any of you know how wide a disc,that can be used with the OE caliper?

There are some c-class disc ,that are 285x22.and they are easy to redrill,becourse the MB holes are drilled on a 105mm pcd

And i wonder if it can fit the 22mm instead of the 18mm ,is there room for it?

Regards,
Skassa

AFAIK you could use AE92 front disc with stock AE86 caliper (238mm).
Measure the central hole of your c-class discs - if the hole is over ~65mm - they are not applicable (you must redrill them to 4X85 PCD and 12mm holes for studs will be very close to the central hole - that's why I fail using BMW 728i discs).

Denmark · 07-22-2005, 10:16 AM

the hole in the c-class discs are 67mm.Yes it will be close ,but there are no force in that direction,so i don´t think it will be a problem

I wan´t to have the discs bigger for better cooling,that´s why i wount use the AE92 discs

Skassa

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Rear brakes	totta Crolla	0	916	02-03-2023 12:54 PM Last Post: totta Crolla
	Switching diffs for disc brakes?	trippin	6	2,623	07-08-2022 03:35 AM Last Post: trippin
	What suspension set up are people using?	kazi	8	8,076	07-06-2017 05:26 AM Last Post: headrush
	Rebuild rear disc brakes toyota crown ms112 axle	bozu	0	3,771	12-21-2016 09:37 PM Last Post: bozu
	Using a different diff in an AE86	megabob	6	8,288	02-17-2015 03:37 PM Last Post: megabob