sensor atachment?
08-08-2011, 03:52 AM
Post: #9
 
Actually the Japanese standard PT (Pipe Taper) is the same to BSPT (British Standard Pipe Taper) :wink:
http://mdmetric.com/tech/thddat7.htm#pt

So yes the sensor can be bolt straight up to the block Smile

Usually the most recurrent problem is when you want to fit defi sensor in sandwich plate (most have 1/8 NPT thread)
or
any 1/8 NPT sensor in Japanese plate (like Grex)
Find all posts by this user


Messages In This Thread
sensor atachment? - fax0815 - 07-10-2011, 05:31 PM
[] - TURBO-AE86 - 07-10-2011, 09:47 PM
[] - fax0815 - 07-12-2011, 04:47 AM
[] - fkn16v - 07-12-2011, 10:39 AM
[] - fax0815 - 07-20-2011, 03:32 PM
[] - fax0815 - 07-23-2011, 10:59 PM
[] - Ivan141 - 07-23-2011, 11:20 PM
[] - fax0815 - 08-08-2011, 01:48 AM
[] - Project D - 08-08-2011 03:52 AM
[] - fax0815 - 08-08-2011, 01:39 PM
[] - Project D - 08-08-2011, 08:41 PM
[] - fax0815 - 08-08-2011, 10:15 PM
[] - Project D - 08-09-2011, 12:44 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Lambda sensor wiring sam3007 10 4,263 05-23-2022 10:00 PM
Last Post: The Doctor
  AE86 Engine Coolant Temp Sensor izanagi 8 20,235 09-06-2014 05:47 PM
Last Post: izanagi
  Hall sensor totta Crolla 7 8,238 02-28-2014 10:07 AM
Last Post: Ivan141
  Video : Adjust the TPS (Throttle Pos Sensor) on the 4A-GE Homem Bomba 3 10,866 10-25-2013 05:13 PM
Last Post: Apsogos
  1/8 BSPT adapter for oil pressure sensor Dino86 4 6,998 06-15-2013 12:34 PM
Last Post: S.K.

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication