|
o2 sensor and rough idling
|
|
10-30-2008, 02:14 AM
Post: #1
|
|||
|
|||
|
o2 sensor and rough idling
Hey this topic mite have been talked about before.
On my ae86 trueno i see theres 2 sensors one near the top of the exhaust manifold and one near the bottom of the manifold. Its just that the bottom one is cut off and im wondering if i need it. At the moment it runs abit rich as i can smell the fuel coming out of the exhaust and im worrying about emissions when i MOT it near late december time. Also when the engine is warm or after a thrashing it struggles to idle properly it dips from 900rpm down to 5-600rpm and bounces back up. Ive cleaned the filter, checked vacuum lines and they seems to be fine any ideas ??? will try and get pics up on the sensors |
|||
|
|
10-30-2008, 07:41 AM
Post: #2
|
|||
|
|||
|
o2 sensor and rough idling
the second lower o2 sensor looking things is actually exhaust temp sensor for your cluster, has nothing to do with ecu.
Running rough when warm could suggest busted plugs and/or leads Idle hunting can be a dirty throttle body, or dizzy out but a tooth. Steve.....this is sparrrrrtan |
|||
|
|
|
11-12-2008, 06:53 AM
Post: #3
|
|||
|
|||
|
o2 sensor and rough idling
hi there..
i'm new comer, my engine had similar problem with u alex, but my check engine directly appears when the engine was warm, i've check with my friend,they suggest to change new that sensors |
|||
|
|
|
11-19-2008, 04:01 PM
Post: #4
|
|||
|
|||
|
o2 sensor and rough idling
hmmm.... ic ic my lights was fine nothing came on when running
the porblem i found now is that its something to do with eleco or ground (i think) as it gets worse when i put radio, heater and lights on i have bought a grounding kit with voltage stabilizer just waiting for a gd time to put it on |
|||
|
|
|
11-19-2008, 04:02 PM
Post: #5
|
|||
|
|||
|
o2 sensor and rough idling
hmmm.... ic ic my lights was fine nothing came on when running
the porblem i found now is that its something to do with eleco or ground (i think) as it gets worse when i put radio, heater and lights on i have bought a grounding kit with voltage stabilizer just waiting for a gd time to put it on |
|||
|
|
|
11-26-2008, 07:52 PM
Post: #6
|
|||
|
|||
|
o2 sensor and rough idling
installed earthing kit with voltage stabilizer and idle is still rough moving up and down alot only when i put the front fogs on when they are off its less rough
plugs was new 6 months ago so gonna change leads, dizzy cap and rotor arm and see |
|||
|
|
|
11-26-2008, 08:06 PM
Post: #7
|
|||
|
|||
|
o2 sensor and rough idling
don't forget to check your TPS setting :wink:
AE86 FANATIC!!! |
|||
|
|
|
11-26-2008, 08:08 PM
Post: #8
|
|||
|
|||
|
o2 sensor and rough idling
how do i do that ? im abit of a noob lol
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Lambda sensor wiring | sam3007 | 10 | 4,165 |
05-23-2022 10:00 PM Last Post: The Doctor |
|
| AE86 Engine Coolant Temp Sensor | izanagi | 8 | 20,097 |
09-06-2014 05:47 PM Last Post: izanagi |
|
| Hall sensor | totta Crolla | 7 | 8,162 |
02-28-2014 10:07 AM Last Post: Ivan141 |
|
| Video : Adjust the TPS (Throttle Pos Sensor) on the 4A-GE | Homem Bomba | 3 | 10,735 |
10-25-2013 05:13 PM Last Post: Apsogos |
|
| Engine not idling right | Jezza_hr | 28 | 22,106 |
10-01-2013 08:43 AM Last Post: jondee86 |
|
User(s) browsing this thread: 2 Guest(s)