My Ride

[|BUDA|]

almost start the engine have to check injectors wiring

[|BUDA|]

it lives .....

need to work on vacum tubes to get a nice running engine

[|BUDA|]

[|BUDA|]

http://www.youtube.com/watch?v=obTykM8xeAw

[|BUDA|]

some test for 86 day

my clutch slips...

diff need tune

and some more bits

[Project D]

Tune your front axle, you loose too much grip when you initiate your drift.
(Maybe your tyre pressure is too high on the front)
Also your suspension seems too soft (we can see it bouncing)

[slowboy2]

[zenki]

yea the rear seems to bounce all over the place. But i saw quite few good drifts, with a little tune it will be awesome.

[|BUDA|]

the front is soft and tire has some pressure

e have to see the problem with the clutch

[|BUDA|]

so my problem

i got a 4 kg flywheel and exedy stage 2 and the clutch slips at full pedal or under 4000rpm..

since the 4AGZE has almost 10kg flywheel is it the fast spin the problem?

in the pic there is my old flywheel an press plate with a contact area of 222mm has the oem clutch plate has 220mm

the almost new one is the exedy stage 2 press plate with have a contac area of 210 mm and the exedy clutch plate is 200mm. also the 4 kg flywheel as the same area 200mm.

just to test i will get the 86 std flywheel and press plate fitted with the exedy clutch plate





i got the 4kg and exedy kit 2 year ago so they are like brand new


also

opened my diff and the pinon and ring were ok and the backlash was fine but the diff made mutch noise when hot and shake the rear end of the car

when the kaaz 2 way was was opened it was full of tiny micro sand type due to the many disks of the lsd. it was blocking some oil holes

so i hope it will be fixed when cleaned

now it is on a lsd oil bath to get the disks soaked

hope to get news soon