|
T3 Panhard rod
|
|
08-04-2008, 08:36 AM
Post: #1
|
|||
|
|||
|
T3 Panhard rod
Has any one fitted one of the T3 Panhard rods?
Mine seems to knock repeatedly on run down but goes away when i accelerate. any ideas? My Hachi Roku |
|||
|
|
08-04-2008, 08:55 AM
Post: #2
|
|||
|
|||
|
T3 Panhard rod
I got one. No problem after 1/2 a year driving/drifting.
|
|||
|
|
|
08-04-2008, 09:09 AM
Post: #3
|
|||
|
|||
|
T3 Panhard rod
it only started after fitting the panhard and coilovers.
but on run down it goes... kn-kn-kn-kn-kn-knock If the rod is adjusted wrong could it do that? My Hachi Roku |
|||
|
|
|
08-04-2008, 09:55 PM
Post: #4
|
|||
|
|||
|
T3 Panhard rod
Ok it was me being a tard, nothing to do with the rod at all. Wheel nuts worked loose
My Hachi Roku |
|||
|
|
|
08-05-2008, 06:23 AM
Post: #5
|
|||
|
|||
|
T3 Panhard rod
Sounds like a normal thing. Just make sure that the bolts are tight.
Fully Restored 1985 Corolla GT-S 1987 328ci SR20DET Drift Car 1989 Honda Civic Si-R Current Project 2002 Corolla CE Daily Driver http://www.TheTunerSource.com |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Question on Rod Bearings | mister86 | 3 | 3,903 |
03-19-2020 03:46 AM Last Post: oldeskewltoy |
|
| rod-ends | Lajoosh | 10 | 9,287 |
03-27-2012 10:24 PM Last Post: fax0815 |
|
| Panhard Rod Bolt Sizes | Corleone | 8 | 8,197 |
11-07-2011 06:55 PM Last Post: Corleone |
|
| Longer Tie rod / steering ends | meshin | 2 | 6,003 |
11-10-2010 01:57 PM Last Post: meshin |
|
| Adjustable Panhard Rod Bar | christsang7 | 7 | 10,800 |
07-12-2010 04:42 PM Last Post: eight-six |
|
User(s) browsing this thread: 2 Guest(s)