Digital Dash

[Roger]

Here's something that i made after instaling my digi dash
i hope this can help


From analogue to digital gauge cluster
car:1985 left hand drive kouki 4age ae86 with analogue cluster
install:(1984 jdm rhd digital gauge cluster)

swap first your analogue fuel sender(partnr 83320-19715)with a
digital fuel sender (partnr 83320-19725).

Also swap the oil pressure switch with a digital one
(one with just a oil light on the dash)
One of a EP71,82,91/SW20/AE92/ST16x will do the trick

Relocate the speedo cable from the right to the left(no need to buy a rhd cable its long enough)




left plug of the digital cluster conected to the back of the cluster

1)Gauge fuse Red/blue stripe (5)
2)Tail fuse Black/brown dots (2)
3)Ground White/black stripe,pink dots (16)
4)Fuel sender gauge Yellow/red stripe (25)
5)------
6)Rheostat or ground Green/brown dots (3)
7)Gauge fuse (same as nr 1) Red/blue stripe (5)
8)Ground Brown/black dots (26)
9)------
10)Fuel level warning Yellow/blue stripe (24)
11)-----
12)Water temp sender gauge Yellow/green stripe (4)



Right plug (white plug from left to right)

1)EFI computer Green/red stripe (7)
2)Door Red/white stripe (21)
3)Dome fuse Red/green stripe (20)
4)-----
5)Turn signal switch terminal left green/black stripe,brown dots (27)
6)Dimmer switch terminal Red/green stripe (12)
7)Ground Brown/black dots (19)
8)Turn signal switch terminal right Green/yellow stripe,brown dots (2
9)Charge fuse Yellow (10)
10)IGN fuse Black/orange stripe (9)
11)Oil pressure sender gauge/switch Yellow/black stripe (
12)-------
13)Brake fluid level/parking brake switch Red/black stripe (6)
14)Rheostat or ground Green/brown dots (3)


The numbers behind the colors refer to the original location of the wires by page BE-22 from the AE86 manual
some wires(like pwr/econ,vacuum switch) simply remain unused and are not needed