URGENT: Need electric help, injectors not fireing
07-05-2011, 12:15 AM
Post: #6
 
Fuel can be blocked if the copper washers on the banjo fitting under the
pulsation damper get switched around. The washer with the teeth on the
inside goes on top of the banjo, and the thin one goes underneath.

If they get swapped around the thin one can go up inside the pulsation
damper and block the flow. Take off the pulsation damper and look inside
the annulus. If you can see copper up in there, the copper washer has
gone inside... and you will need to get it out Smile

Cheers... jondee86
Find all posts by this user


Messages In This Thread
[] - [Walaki]D`Lair - 07-04-2011, 10:43 PM
[] - ZaX - 07-04-2011, 10:54 PM
[] - Ivan141 - 07-04-2011, 10:54 PM
[] - [Walaki]D`Lair - 07-04-2011, 11:50 PM
[] - jondee86 - 07-05-2011 12:15 AM
[] - ZaX - 07-05-2011, 01:31 AM
[] - ZaX - 07-05-2011, 01:55 AM
[] - bozu - 07-05-2011, 06:41 AM
[] - ZaX - 07-05-2011, 10:36 AM
[] - Nomuken - 07-05-2011, 10:47 AM
[] - ZaX - 07-05-2011, 11:47 AM
[] - Nomuken - 07-05-2011, 01:10 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  4AGE Injectors resistor Blaze0010 4 394 01-27-2025 03:20 PM
Last Post: Bean
  Need help identifying this! takumi_mt 4 1,133 04-05-2024 09:17 AM
Last Post: takumi_mt
  TRD ECU need help ps13michi 5 4,146 02-18-2022 10:42 AM
Last Post: ps13michi
  Need some help DJexor 4 5,443 03-13-2018 05:37 PM
Last Post: pack
  JDM trueno not starting. need help! kazi 8 8,958 03-12-2017 05:05 PM
Last Post: kazi

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication