Clutch adjustment
|
11-09-2011, 09:54 AM
Post: #9
|
|||
|
|||
What happens at cruising speed, 60-80kph in 4th gear, holding the throttle steady & pushing down the pedal & letting your foot slip off?
The engine will gain about 20-2500revs and the tires might chirp and the clutch should grab so fast that there is almost no measurable time between reving free then back down to road speed. If you hear the engine wind down slowly, like 1 second or more, then it's a poor clutch. DO NOT LISTEN TO ANY BS ABOUT NOT 'BREAKING IT IN' RIGHT! Yes, you can hurt it with high revs & slipping it a lot, but a dozen or so normal take offs is all it needs to get the fuzz off the disk. So what! |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Clutch adjustment - heshan - 11-02-2011, 09:35 PM
[] - PatrickAE86 - 11-08-2011, 11:08 AM
[] - allencr - 11-09-2011 09:54 AM
Plausible ?? - jondee86 - 11-09-2011, 10:08 AM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Handbrake adjustment discs? | DMC | 8 | 1,897 |
03-10-2024 08:08 PM Last Post: DMC |
|
Camber adjustment vs original struts | Lt86 | 9 | 9,438 |
05-07-2015 09:45 PM Last Post: zenki |
|
How to adjust camber on the front using standard adjustment? | JDMitch | 14 | 20,192 |
06-17-2011 04:55 PM Last Post: Andrax |
|
DIY/How-to: E-brake adjustment for GT-S rear ends. | assassin10000 | 3 | 16,136 |
12-12-2010 11:47 PM Last Post: Hachi |
|
pinion adjustment | totta Crolla | 17 | 14,620 |
11-12-2010 10:46 AM Last Post: totta Crolla |
User(s) browsing this thread: 6 Guest(s)